CLW GROUP's strict product quality is very well-known in the industry. In addition to the lining of the corrosive goods transport vehicles in Liaocheng, the car body is guaranteed to be foolproof. The upper and lower parts of the car body are also covered with aluminum alloy profiles and the bottom plate Cover the lower part of the vehicle with rubber leather, double-open the rear door, double-open the right-hand middle door, and have a horizontal ring for fixing the goods inside. There are static belts, fire extinguishers, and fire hoods on the outside of the vehicle. Smoke alarms and door anti-theft alarms are installed in the vehicle. Production of national dangerous goods regulations.
The lpg tank truck produced by CLW GROUP is made of high-quality carbon steel or aluminum alloy. The small tank body is 5mm thick, and the tank body above 15 square meters is 6mm thick. According to different tank body sizes, flaw detection reports and Tank inspection report. The refueling device can be a side-mounted refueling machine or a built-in refueling machine, and the brand can be a well-known brand. Oil pumps can be customized with different flow rates and heads according to different sizes of tanks. The oil pump adopts new technology and wear-resistant gear materials, and is equipped with differential pressure safety valve overload protection.
Today, the editor of CLW Group talked about the daily maintenance of tyres on trucks. 1. Ensure that the tire pressure is within the specified value range: each tire is marked with a tire pressure value, and everyone can inflate the tire according to the regulations of the car factory. It is worth noting that the tire pressure must be the same for the tires on the same axis. 2. Regularly change the position of the tire: Due to the different functions and loads of each axle, there are also certain differences in wear. Regular tire rotation can prolong the service life of the tire. 3. Keep the tires clean: After driving, be sure to clean up the foreign matter on the tires in time. Especially between the two wheels of the truck's rear wheels, it is easy to be mixed with rocks and other debris. If it is not cleaned in time, not only will there be a risk of puncture, but also other vehicles or pedestrians.
What does it mean when an ambulance lights turn off,The chairman of CLW Group Cheng Aluo proposed to use perfect service and strong competitiveness to do the market, and to provide customers with meaningful and valuable product solutions. We do not pursue the maximization of our own interests, but the maximization of the interests of our customers. , CLW Group’s goal is to be a high-value special-purpose automobile manufacturing enterprise, not only with high-quality services, but also with scientific management. While serving customers well, it must also allow employees to enhance their own value, so as to completely realize the goal of the enterprise.
The editor of CLW Group will give you a comprehensive understanding of the reasons for the difficulty of turning the water ring vacuum pump of the vacuum sewage truck 1 The gap between the positioning bearings at both ends of the pump is not adjusted properly, that is, when the thickness of the gap adjustment spacer ring is less than the original thickness, when the back cap is locked, the two rows of inner and outer rings are squeezed by unconventional forces, causing the bearings to rotate Difficult or unable to turn 2 The bearing inner ring is not installed in place 3 The gap between the impeller and the two ends of the pump is not adjusted properly The adjustment method is to add or subtract shims between the bearing seat and the positioning surface of the bracket where the bearing seat is installed 4 After the sealing surfaces of the static and dynamic rings of the mechanical seal are broken, they will jam each other,what does it mean when an ambulance lights turn off.
