What qualifications do u need to be an ambulance driver,CLW GROUP received an order for 6 Orient Dolica D7 National VI cleaning sewage suction trucks ordered by a customer in Jilin. The customer stated that the car was used to improve the sanitary environment of the local poor counties and ensure the sanitary conditions of the local people’s lives. The company learned about the situation , Immediately, an urgent order was placed on the production workshop. With the support of the perfect technological process and quality inspection system, Cheng Liren took only 3 days to complete the production and commissioning of 6 brand-new sewage suction trucks.
The cleaning and sweeping truck produced by our company is a multi-functional vehicle. The main function is to undertake the cleaning, washing and cleaning operations of roads such as urban areas, national highways and expressways. The vehicle is equipped with two brush plates and a central wide suction cup. , Or four-pan sweep, rear suction mouth. Types of road work vehicles. The sweeper has many functions such as road cleaning, road scrubbing, high-pressure cleaning, curb scrubbing, garbage collection, sewage recycling, spraying, and road separation wall cleaning.
Today, the editor of CLW Group introduces the maintenance knowledge of sewage suction truck. 1. Start the engine of the sewage suction truck at least once a month, run it at idle speed for 4-5 minutes, and check the operation of the engine. If there is any abnormality, it needs to be adjusted and repaired in time. In addition, always check the battery. The electrolyte level of the battery must be 10-15mm higher than the electrode plate. If it is insufficient, add distilled water in time, keep sufficient power, and charge the battery if necessary. 2. The gasoline tank should be tightly sealed and the temperature should not be too high. It is best not to store gasoline for too long.
In order to ensure that the CLW Group team is a high-quality team, all employees must pass strict interviews before entering the company. The company first has a three-month application period. Once the trial is successful, the benefits and benefits will be favorable. In addition, the company has also established its own technical training school to continuously input fresh blood for the company. At the same time, it has been maintaining in-depth exchanges and cooperation with major polytechnics, striving to master the most cutting-edge technology and industry information, and remain invincible.
What should I do if there is an oil leak at the bottom of the garbage truck? CLW Group engineers will answer for you Oil leakage after long-distance driving may be caused by rough roads, bottom drag occurred during driving, and sometimes inadvertent and minor bumps to the oil pan, which was not found at the time, and oil leakage was found after returning; it may also be caused by the engine running at high speed for a long time , Parts such as power steering pump and gearbox may leak oil due to heavy load Solution: 1 Check the chassis during maintenance and replace damaged parts 2 When doing maintenance, let the maintenance personnel check the leakage part, tighten or replace the corresponding oil seal,what qualifications do u need to be an ambulance driver.
