- Garbage Compactor Truck
- Side Load Garbage Truck
- Roll-off Garbage Truck
- Garbage Collection Truck
- Food Waste Garbage Truck
- Skip Garbage Truck
- Ambulance
- Mobile Clinic Vehicle
- Concrete Mixer Truck
- Truck-mounted Crane
- Refrigerated Truck
- Fire Engine
- Watering Truck
- Spraying Truck
- Street Sweeper
- Vacuum Truck
- Flatbed Transport Truck
- Aerial Work Platform Truck
- Tow Truck
- Dump Truck
- LPG Truck
- LPG Storage Tank
- LPG Semi-trailer
- LPG Filling Station
LPG truck or tanker truck, also known as liquefied gas tanker, is a special vehicle used to transport propane, propylene, dimethyl ether, liquid ammonia, methylamine, acetaldehyde and other liquefied gases.
This tanker truck is using DFAC chassis carried with 8 cubic meter tank.
It has the characteristics of reasonable structure, safe and reliable, convenient operation and easy maintenance.
CLW LPG seires factory show
Top Part Advantage
【Tank Body】
The body of tanker truck is made of high-quality carbon steel or aluminum alloy. The thickness of the tank with a capacity of 15 cubic meters or less is 5mm, and the thickness of a tank with a capacity of 15 cubic meters or more is 6mm.
【Oil Pump】
Select the oil pump with appropriate parameters according to the size of the tank, use wear-resistant gear material, and be equipped with differential pressure type safety overload valve protection.
【Dispenser】
Tanker truck can be equipped with optional side-mounted fuel dispenser or built-in fuel dispenser.Optional with automatic fault detection and overload protection.
【Tank Cover】
Installed on the top of the tanker truck, with built-in breathing and emergency exhaust function, folding guardrail can be raised and lowered, easy to use.
【Bottom Loading System】
Including oil discharge valve, oil and gas recovery, subsea valve and other devices.The subsea valve can automatically disconnect the pipeline in an emergency to prevent leakage.
【Safe Device】
Equipped with two fire extinguishers, the tail is equipped with a static electricity guide device to prevent accidents caused by static electricity during loading, unloading or transportation.
Chassis Advantage
【ABS】
The braking time and braking distance are shortened, which effectively prevents the vehicle from slipping and flicking during emergency braking, avoids violent friction between the tire and the ground, and reduces tire wear.
【Hydraulic Steering】
The steering wheel and steering wheel are connected by mechanical components for precise control. The hydraulic pump is driven by the engine, with sufficient steering power and high reliability.
【Engine】
High-torque high-horsepower engine, strong power, 30% slope start without worry, low fuel consumption, environmental protection standards.
【Gearbox】
5-speed gearbox, more gears, adapt to complex road sections, easy shifting, economical and fuel efficient.
【Urea Tank】
Urea tank is used to store urea aqueous solution, selective reduction of SCR, reducing nitrogen compounds to meet the national five standards, more economical and environmentally friendly.
【Exhaust tube】
The tanker truck chassis adopts the front exhaust pipe design, which effectively prevents the oil fume from contacting transportation goods such as gasoline or diesel, and eliminates potential safety hazards.
【Battery】
Leading technology, extending life by more than 28%. The addition of special active materials to the polar plates improves the charging performance by more than 15.6%.
【Air Condition Compressor】
Adjust the temperature and humidity in the car. An air-conditioning system that provides drivers with a comfortable environment, warm in winter and cool in summer.
【Air Brake】
Compressed air enters the brake air chamber to lock the wheels, effectively preventing brake failure when the handbrake or mechanical failure of the drive shaft occurs. The brakes are more stable, more accurate and safer, and the uphill start is easy.
Chassis model |
CLW5090GYQD |
|||
Cab |
Dongfeng single row cab, with power steering.,without a/c |
|||
Driving Type |
4*2 Left hand driving |
|||
Max Speed (km/h) |
99 |
|||
Overall dimension(mm) |
6500*2250*2600 |
|||
GVW( kg) |
9525 |
|||
Mass in working order( kg) |
5910 |
|||
Wheelbase(mm) |
3800 |
|||
F/R track base(mm) |
1903/1640 |
|||
F/R overhang(mm) |
1130/1900 |
|||
Approach/Departure Angel |
17.5/12.5 |
|||
Tire |
7.00R16 (6+1) |
|||
Clutch |
Single-plate dry diaphragm spring clutch |
|||
Steering |
Hydraulic steering with power assistance |
|||
Gear box |
5-speed |
|||
Bridge |
Front axle |
3T |
||
Rear axle |
5T |
|||
Engine |
Model |
YC4E140-33 |
||
Fuel Type |
Diesel fuel |
|||
Type |
Water-cooled four-stroke,, direct injection, turbocharged |
|||
Exhaust(ml) |
4257 |
|||
Max output power/rotate speed (hp /rpm ) |
140/3200 |
|||
Braking system |
Service Brake |
Compressed air brake |
||
Park Brake |
Spring energy |
|||
Auxiliary brake |
engine exhaust brake |
|||
Electric system |
12v |
|||
LPG TANK Specification |
||||
Design specific gravity |
0.42 Kg/L |
|||
Tank material |
Q345R |
|||
Tank Designed thickness |
End cover |
9.35mm |
||
Tank body |
9.37mm |
|||
Design temperature |
500C |
|||
working temperature |
20~500C |
|||
Corrosion allowance |
1.0mm |
|||
Designed pressure |
1.77Mpa |
|||
Hydraulic test pressure |
2.3MPa |
|||
Leak test pressure |
1.77Mpa |
|||
Heat treatment |
Wholly get rid of stress |
|||
Use Years |
Ten years |
|||
LPG dispenser |
Function |
Dispenser LPG to LPG cylinder or other LPG truck |
||
Flow rate |
10 ~ 60L/min |
|||
Max working pressure |
2.5Mpa |
|||
LPG pump |
Function |
Delivery and pump LPG |
||
Flow rate |
30-80L/min |
|||
Working pressure |
1.60Mpa |
|||
Liquid level meter |
Type |
Rotary |
||
Model |
YWG-2.5 |
|||
Nominal pressure |
PN2.5Mpa |
|||
Surveying range |
50-2300mm |
|||
Precision |
2.5Grade |
|||
Emergency cutting valve |
Type |
Gas phase |
QCJ43F-2.5-8 |
|
Liquid phase |
QCJ43F-2.5-7 |
|||
Nominal pressure |
PN2.5Mpa |
|||
Nominal diameter |
Gas phase |
DN25mm |
||
Liquid phase |
DN50mm |
|||
Operation way |
Fluid pressure |
|||
Closing time |
≤10 Sec |
|||
Melting switch temperature |
70±5°C |
|||
Safe valve |
Type |
A412F-2.5-16 |
||
Model |
Inner full lift |
|||
Nominal pressure |
PN2.5 MPa |
|||
Nominal diameter |
DN50 |
|||
Opening pressure |
1.7 MPa |
|||
Closing pressure |
1.86-1.94MPa |
|||
Complete opening pressure |
<2.12 MPa |
|||
Loading and unloading device |
Valve type |
Gas phase |
YKAG-3.3-6 |
|
Liquid phase |
YKAG-3.3-7 |
|||
Model |
Quick tie-in |
|||
Nominal Diameter |
Gas phase |
DN25mm |
||
Liquid phase |
DN50mm |
|||
Pressure meter |
YN-100T |
|||
Temperature gauge |
WTQ-280 |
|||
Other equipment |
||||
1.double tool box 2.double valve box 3.double Emergency Cut-off Valve 4.single pipe liquid out 5.both side loading and unloading |
What is your product range?
Are you a manufacturer or trading company?
What information shall I provide you when I need your offer?
How long could we receive our goods?
What kind of payment can you accept?
What kind of shipment do you use?
- Chassis Brand:DONGFENG
- Size:10430×2550×3460mm
- Price:Starting at$55000
- Chassis Brand:FAW
- Size:8770×2490×3250mm
- Price:Starting at$35000
- Chassis Brand:ISUZU
- Size:7355×2320×2750mm
- Price:Starting at$32000