- Garbage Compactor Truck
- Side Load Garbage Truck
- Roll-off Garbage Truck
- Garbage Collection Truck
- Food Waste Garbage Truck
- Skip Garbage Truck
- Ambulance
- Mobile Clinic Vehicle
- Concrete Mixer Truck
- Truck-mounted Crane
- Refrigerated Truck
- Fire Engine
- Watering Truck
- Spraying Truck
- Street Sweeper
- Vacuum Truck
- Flatbed Transport Truck
- Aerial Work Platform Truck
- Tow Truck
- Dump Truck
- LPG Truck
- LPG Storage Tank
- LPG Semi-trailer
- LPG Filling Station
Truck-mounted crane truck, also called crane truck, is a kind of equipment that uses hydraulic lifting and telescopic system to lift, rotate, and lift goods. It is usually assembled on cargo trucks. The crane can be operated from left to right, can rotate 360 degrees in all directions, and rotates in all directions. It is produced with military quality, reliable quality, long life and fast working speed. The use of high-quality oil cylinder seal, durable, and made of high-strength steel plate, lighter weight, greater lifting weight.
Mechanism Advantage
【Crane】
2-120Ton crane range of the truck-mounted crane. Cargo boxes or cranes of different lengths and tonnages can be selected according to user needs. High lifting height and wide operating range.
【Hydraulic System】
The hydraulic oil ports of the power components, control and adjustment components, actuators and auxiliary components in the crane hydraulic system are all equipped with sealing plugs to prevent the intrusion of dirt and air.
The hydraulic cylinder is made of high-pressure galvanized steel, with good hardness and pressure resistance, powerful lifting, free expansion and contraction, corrosion and rust prevention. Easily realize the lifting, turning and lifting of goods.
【Front Leg】
The outriggers of the truck-mounted crane have a large span. The standard configuration uses round outriggers. The rear outriggers need to be installed according to the weight and angle of the road conditions. The span can be adjusted according to the width of the road.
【Slewing Mechanism】
The slewing mechanism of the truck-mounted crane is mainly used to realize the rotary positioning of the cargo and the crane. It has the characteristics of small size, high efficiency, light weight, low noise, stable operation and easy maintenance.
【Manual Lever】
The crane of the truck-mounted crane uses the throttle linkage method to realize the linkage between the operating lever and the throttle. Both hands can control multiple actions at the same time to achieve low fuel consumption, low noise and reduce failure rate.
Chassis Advantage
【ABS】
The braking time and braking distance are shortened, which effectively prevents the vehicle from slipping and flicking during emergency braking, avoids violent friction between the tire and the ground, and reduces tire wear.
【Hydraulic Steering】
The steering wheel and steering wheel are connected by mechanical components for precise control. The hydraulic pump is driven by the engine, with sufficient steering power and high reliability.
【Engine】
High-torque high-horsepower engine, strong power, 30% slope start without worry, low fuel consumption, environmental protection standards.
【Gearbox】
5-speed gearbox, more gears, adapt to complex road sections, easy shifting, economical and fuel efficient.
【Urea Tank】
Urea tank is used to store urea aqueous solution, selective reduction of SCR, reducing nitrogen compounds to meet the national five standards, more economical and environmentally friendly.
【Exhaust Gas Filter tube】
Leading technology, extending life by more than 28%. The addition of special active materials to the polar plates improves the charging performance by more than 15.6%.
【Battery】
Leading technology, extending life by more than 28%. The addition of special active materials to the polar plates improves the charging performance by more than 15.6%.
【Air Condition Compressor】
Adjust the temperature and humidity in the car. An air-conditioning system that provides drivers with a comfortable environment, warm in winter and cool in summer.
【Air Brake】
Compressed air enters the brake air chamber to lock the wheels, effectively preventing brake failure when the handbrake or mechanical failure of the drive shaft occurs. The brakes are more stable, more accurate and safer, and the uphill start is easy.
Main Technical Parameter | ||||
Product | Crane Truck | Gross Vehicle Weight (kg) | 9980 | |
Curb Weight (kg) | 4860 | Overall Dimension(mm) | 7735x2475x3115 | |
Box inner dimension(mm) | 4800x2000x600 | Cab Allowed Persons | 2 | |
Axle No. | 2 | Wheelbase (mm) | 3800 | |
Chassis Technical Parameter | ||||
ChassisBrand | Dongfeng | Chassis Name | Truck Chassis | |
Overall Dimension (mm) | 7100×2100×2535 | Tyre No. | 6with 1 spare tyre | |
App./ Dep. Angle(º) | 20/16 | Tyre Spec. | 8.25-16 | |
Leaf Spring No. | 12/12+9 | Front Track (mm) | 1550 | |
Fuel Type | Diesel | Rear Track (mm) | 1650 | |
Drive Type | 4×2 | Brake System | Air brake | |
SteeringType | Left hand drive | Gear Box | 5speed forward and 1 reverse | |
Engine Technical Parameter | ||||
Engine Model | CY4102-CE4C | Emission Standard | Euro IV | |
Displacement ( ml) | 3856 | Power (HP/KW) | 120/91 | |
Cylinder No. | 4in line | Engine Type | Water cooling, four stroke, inter-cooling charged, | |
Crane Technical Parameters | ||||
Max lifting weight(kg) | 5000 | Crane boom | Knuckle boom 3 boom | |
Working Radius(m) | 8 | Max lifting height(m) | 11 | |
Rotation Angle(°) | 360°,full rotation | Hydraulic tank volume(L) | 90 |




What is your product range?
Are you a manufacturer or trading company?
What information shall I provide you when I need your offer?
How long could we receive our goods?
What kind of payment can you accept?
What kind of shipment do you use?

- Chassis Brand:DONGFENG
- Size:10430×2550×3460mm
- Price:Starting at$55000

- Chassis Brand:FAW
- Size:8770×2490×3250mm
- Price:Starting at$35000

- Chassis Brand:ISUZU
- Size:7355×2320×2750mm
- Price:Starting at$32000