The effective volume of the Dayun Opuli compactor garbage truck is 6 cubic meters. The compartment material is made of WISCO's high-quality Q235 carbon steel plate. The body is arc-shaped, the side plate is 4mm thick, and the bottom plate is 4mm thick, which can adapt to very large compression. The strength will not cause the compartment to rupture because of the compression too much.
The hydraulic control operating system of the car has electric control and manual control. This device is the manual control lever. Its function is to prevent the electric control from malfunctioning, and it can also operate the dozer, scraper, skateboard and other components in the car. The car can work normally. Manual and electric interchangeable and complementary use, very convenient, very thoughtful design.
This device is the pressure gauge and pressure regulating valve of the hydraulic valve. The indication of the gauge is clear and clear. The user can adjust the system pressure according to the actual vehicle demand and vehicle environment, effectively improving the work efficiency and achieving the best work effect.
A number of hydraulic cylinders are installed near the compressed garbage hopper, and these hydraulic cylinders can realize the functions of automatic lifting and automatic unloading through the hydraulic system. The hydraulic cylinder adopts the domestic well-known first-line brand, which has the characteristics of low failure rate, stable performance and durability. The hydraulic pipeline connected above is also made of precision seamless cold-formed hydraulic tubing, which is clean and free of impurities, will not block the hydraulic valve, is not easily deformed under high pressure, has reliable quality and long service life.
In terms of operation, this Dayun Opuli compactor garbage truck adopts PLC intelligent control system, which adopts well-known domestic brands, with mature and stable technology and low failure rate. The outdoor operation buttons are installed at the end of the trash can, and the function of each button is clearly stated on it, which is very simple and convenient to operate.
The rear of this car is equipped with a bucket lifting mechanism as standard, which can dump two buckets of garbage at the same time. A swing arm mechanism or a large bucket style can be selected according to the actual needs of the user.
In order to avoid the secondary pollution of the ground caused by sewage in the garbage, the Dayun Opuli compactor garbage truck is equipped with two sewage tanks at the bottom of the tank, one in the middle of the tank and the other at the end of the tank, which is used to collect garbage during transfer. The sewage generated in the process and compression process is discharged through the ball valve when the garbage is discharged.
The tail compression bucket can be turned up completely, and when opened, the compressed garbage can be dumped, and then put it down after unloading the garbage.
This is the end of the introduction to the top parts of this Dayun Opuli compactor garbage truck. From the above configuration, it can be seen that the truck is simple to operate, precise in design, high in compression ratio, large in load, and fully automated. The main accessories are imported products or domestic well-known brands, with high quality and worry-free after-sales. Using it to clear and transport urban garbage not only reduces the work intensity of sanitation workers, but also avoids wasting resources. Are you not tempted?
