The lpg tank truck produced by CLW GROUP is made of high-quality carbon steel or aluminum alloy. The small tank body is 5mm thick, and the tank body above 15 square meters is 6mm thick. According to different tank body sizes, flaw detection reports and Tank inspection report. The refueling device can be a side-mounted refueling machine or a built-in refueling machine, and the brand can be a well-known brand. Oil pumps can be customized with different flow rates and heads according to different sizes of tanks. The oil pump adopts new technology and wear-resistant gear materials, and is equipped with differential pressure safety valve overload protection.
The vacuum truck uses airflow movement to collect and store dust and garbage, with a net absorption rate of 99.3%, without secondary dust. It can effectively reduce dust pollution and improve air quality. The following CLW group will take you to learn about this Dongfeng Dolica D7 National VI vacuum cleaner, which is known as a cleaning expert. The first article: When viewed from the side of the car, the upper body of the car adopts a split design, with a stainless steel water tank in the front, a middle connecting machine compartment cover, and a large-capacity trash can in the rear. The box body is made of stainless steel, and the inside of the box body is treated with simple anti-corrosion treatment. The car adopts a brushless design, a central ultra-wide suction cup, the width of the main suction cup reaches 2.8m, the width of the left and right auxiliary suction cups is 500mm, the maximum total working width is 2.4m, and the maximum cleaning particle width is 98mm.
Truck winch covers video,The watering trucks produced by CLW GROUP also ushered in the peak sales season in the hot summer. Our watering trucks are used for road cooling, construction site dust reduction, and landscaping. On July 10, 2017, the head of China Railway 13th Bureau contacted me The sales manager of the company consulted our watering trucks, and after telephone communication, we finally determined that our Dongfeng Dolika watering trucks, with a tank volume of 8.5 cubic meters, ordered 18 units at a time. Yesterday the vehicles were delivered to the user’s location, successfully registered and delivered. The user is very satisfied.
Truck winch covers video,The production of all tank cars of CLW Group follows strict processing and production procedures, and quality comes from ingenuity. In the tank body produced by CLW, an arc-shaped partition is placed every 1.5 meters inside the tank body, which has the effect of anti-wave and anti-vibration. Taking into account the safety issue, in order to avoid the situation of poor car effect and steering wheel steering failure due to liquid collision under full load. Therefore, for every tank vehicle, CLW will use this process. Ensuring safety is a priority for CLW.
Truck winch covers video,The Dongfeng Liuqi corrosive goods van produced by CLW GROUP this time is a product for customers in Liaocheng, Shandong. The car body is made in strict accordance with the size of the announcement. The outer plate is made of 1mm thick cold-rolled plate with one-time shaped shutters. The aluminum plate decorated with good electrical conductivity has vent holes, the inner lining is a rectangular tube frame that is firm and stable, and the interior is filled with breathable, moisture-proof and flame-retardant extruded board. The four materials are compounded by modern technology to ensure the tightness of the car body Related national mandatory standards.
