The mixing tank uses a pear-shaped structure. The tank body and internal blades are made of HG700 high-strength wear-resistant materials. The welding quality is good. The use of variable-angle double logarithmic spiral blades effectively reduces the separation and front and rear of the stirring. Material accumulation problem.
The pressure water tank is a necessary configuration. It has a capacity of 450 liters and a pneumatic water supply with a flushing pressure of 0.35-0.4 MPa, which can clean the inside and outside of the tank and the truck body. The water tank is also intimately installed with a water pipe. The water level can be seen at any time.
There is a flushing pipe at the rear of the truck. The material of the large-diameter steel wire hose greatly improves its service life, anti-freezing ability and anti-aging ability. There are flushing pipes beside the inlet and below the outlet, which is very convenient for washing the truck.
The design of the discharge chute is very scientific, it can be rotated 180 degrees, and there is a limit place every 20 degrees, which can be adjusted up, down, left, and right to adapt to different discharge environments.
The three major hydraulic components: hydraulic motor, hydraulic pump, and reducer are all selected from world-renowned brands with reliable quality and are the first choice for hydraulic components of large concrete mixer trucks.
The operating system uses a rod-based control system with accurate positioning and reliable control. There are three control points in the cab and on both sides of the rear of the truck. It has a compact structure and flexible operation.
The design of this concrete mixer truck is scientific and reasonable, and the production technology is advanced. This type of mixer truck is favored by users.
