- Garbage Compactor Truck
- Side Load Garbage Truck
- Roll-off Garbage Truck
- Garbage Collection Truck
- Food Waste Garbage Truck
- Skip Garbage Truck
- Ambulance
- Mobile Clinic Vehicle
- Concrete Mixer Truck
- Truck-mounted Crane
- Refrigerated Truck
- Fire Engine
- Watering Truck
- Spraying Truck
- Street Sweeper
- Vacuum Truck
- Flatbed Transport Truck
- Aerial Work Platform Truck
- Tow Truck
- Dump Truck
- LPG Truck
- LPG Storage Tank
- LPG Semi-trailer
- LPG Filling Station
Do ambulances have ventilators?
Yes.Advanced life support type ambulance has to equipped with ventilators but only for portable ventilator as the ventilators machine is usually very large and the ambulance has limited space. Ambulance has to carry as much as emergency rescue device. Here is the list of advanced life support ambulance equipment only for your reference,the equipment can be customized by the user's requirements:
Advanced life support ambulance equipment |
||||
No. |
Name |
Model |
Main function/specifications |
Qty. |
I |
Ambulance system |
|||
i |
Stretcher and equipment |
|||
1 |
Automatic loading stretcher |
WSX-A8 |
Weight: 160KG |
1 |
2 |
Scoop stretcher |
Standard |
Load-bearing: 250KG |
1 |
3 |
Infusion rack |
WSX-F3 |
Load bearing: 2.5Kg |
1 |
4 |
Soft stretcher |
Standard |
Load-bearing 200Kg |
1 |
ii |
Oxygen supply facility |
|||
1 |
Oxygen cylinder |
10L |
Steel, nominal pressure 15MPA |
2 |
2 |
Oxygen supply system |
On-board oxygen centralized control system |
Integrated control valve, panel and outer panel display, with national patent. |
1 |
|
|
Oxygen terminal |
Equipped with two terminals, a humidifier, and a breathing connector. The oxygen terminal has a two-stage needle roller self-locking function. |
1 |
iii |
Auxiliary facilities |
|||
1 |
Partition cabinet nursing seat |
JSV |
Sky blue artificial leather, foldable, with two-point safety belt. |
1 |
2 |
Single seat right |
JSV |
The original seat facing the front of the car has national patents, sky blue imitation leather, side backrest and three-point seat belt. |
1 |
3 |
Three-person side seat |
JSV |
With national patent, sky blue artificial leather, the cushion can be lifted up, including backrest, cushion, two-point safety belt, etc. |
1 |
4 |
Stretcher loading platform |
Aluminum alloy |
Auxiliary stretcher boarding, protective stretcher area floor. |
1 |
II |
Appearance, warning system |
|||
i |
Warning lights |
|||
1 |
Special top cover assembly for ambulance |
JSV |
The iron parts are formed by the front wind wing, the middle iron top, and the die. The streamlined design has a national patent. |
1 |
2 |
Front wind wing flashing light assembly |
JSV |
LED blue flashing light, composed of three embedded lamps on the left, center and right, PC injection molding, streamlined design, with national patent. |
1 |
3 |
Rear wing strobe light assembly |
JSV |
LED blue flashing light, composed of three embedded lamps on the left, center and right, PC injection molding, streamlined design, with national patent. |
1 |
4 |
Flash/lighting integrated light |
JSV |
It integrates two functions of blue LED flashing and white field lighting. PC injection molding lamps have national patents. |
6 |
ii |
Color bars and logos |
|||
1 |
Ambulance sign |
Reflective film |
First aid logo of the first aid agency, AMBULANCE characters, etc. |
1 |
2 |
Red color bar |
Spraying |
Bright colors, eye-catching, effective warning. |
1 |
3 |
Sun protection film |
Dark gray |
Medical cabin window glass and cockpit lift glass. |
1 |
III |
Electrical system |
|||
i |
Power configuration |
|||
1 |
Inverter charging machine |
TB |
Pure sine wave 1000W |
1 |
2 |
External power system |
80190 |
240V/16A, white |
1 |
3 |
External power cable |
3*2.5*20 |
20 meters, with 10 meters grounding wire |
1 |
4 |
AC/DC socket |
Combination socket |
Can be connected to three/two-hole multi-function sockets, AC/DC dual-purpose sockets. |
3 |
5 |
Battery |
GK29-10655AB |
80AH |
1 |
6 |
Mobile power |
|
Multifunctional power bank |
1 |
ii |
Interior lighting |
|||
1 |
Indoor lighting |
LED |
DC12V, square |
2 |
2 |
Indoor lighting |
LED |
DC12V, round |
2 |
3 |
Surgical spotlight |
LED |
DC12V, adjustable light source angle. |
2 |
iii |
Auxiliary facilities |
|||
1 |
Two-way monitoring system |
HL |
Dual probes, reversing display, indoor video monitoring function |
1 |
2 |
Walkie-talkie system |
JMCSV-DJ-1 |
DC12V, intercom |
1 |
3 |
Multifunctional ventilating fan |
KLX |
Suction/exhaust dual function |
1 |
4 |
Electrical control panel |
Membrane switch |
The front and rear cabins are respectively equipped with membrane switches for centralized control. |
1 |
5 |
Rear air conditioner/heater |
JL |
Independent control |
1 |
iv |
Disinfection facility |
|||
1 |
UV disinfection lamp |
CXD-30A |
Timed and effective antivirus |
1 |
2 |
Vehicle negative pressure system |
TK-FY-12 |
1. Through the independent air conditioner of the medical cabin, the fresh air from outside enters the negative pressure medical cabin through the external circulation, and the principle of fluid mechanics is used to form a directional airflow from the clean area (medical staff area) to the infection source area (patient area) to achieve ventilation., The purpose of not polluting the environment. |
1 |
|
|
|
2. When the negative pressure device is started, the air pressure in the compartment is -30Pa to -10Pa. |
|
|
|
|
3. The discharged gas is discharged into the atmosphere after being sterilized by a high-efficiency filter, and must not enter the negative pressure chamber for recirculation. |
|
|
|
|
4. The filtration rate of 0.3 micron aerosol by air filter is greater than 99.97%. |
|
IV |
Cabinet/Interior System |
|||
i |
Cabinet system |
|||
1 |
Middle partition assembly |
JSV |
Iron parts, die stamping forming, including sliding windows |
1 |
2 |
SMC wall cabinet |
JSV |
Polymer ABS material mold forming |
1 |
3 |
Partition horizontal cabinet |
JSV |
Polymer ABS material mold forming |
1 |
4 |
Left corner cabinet |
JSV |
Polymer ABS material mold forming |
1 |
5 |
Left front wall cabinet |
JSV |
Polymer ABS material mold forming |
1 |
6 |
Low rear left cabinet |
JSV |
Polymer ABS material mold forming |
1 |
7 |
Three-seater cabinet on the right |
JSV |
Polymer ABS material mold forming |
1 |
ii |
Interior system |
|||
1 |
Medical cabin roof interior |
JSV |
Polymer ABS material mold forming |
1 |
2 |
Interior parts on the left side of the medical cabin |
JSV |
Polymer ABS material mold forming |
1 |
3 |
Interior parts on the right side of the medical cabin |
JSV |
Polymer ABS material mold forming |
1 |
4 |
Medical cabin tailgate inner panel |
JSV |
Polymer ABS material mold forming |
1 |
5 |
Inside the sliding door of the medical cabin |
JSV |
Polymer ABS material mold forming |
1 |
6 |
Medical floor |
Overall plastic |
Waterproof, anticorrosive, abrasion resistant, antibacterial |
1 |
V |
Other |
|||
1 |
Side sliding door and sliding window |
Custom parts |
Black glass, flat mount |
1 |
2 |
Side sliding door on the car armrest |
Self crust |
Black, right side sliding door |
1 |
3 |
Handrail on tailgate |
Self crust |
Black, rear of cabinet |
1 |
4 |
Inner ceiling armrest |
Aluminum alloy |
White, antibacterial handrail |
1 |
5 |
Fire extinguisher |
Transit original |
Dry powder type, 2KG, including 1 original one |
2 |
6 |
safety hammer |
Transit original |
With alarm function |
1 |
7 |
Sharps Box |
3L |
Medical waste storage |
1 |
8 |
Rear pedal bumper |
stainless steel |
Prevent stretcher collision damage |
1 |
VI |
Equipment |
|||
1 |
Car transport ventilator |
SH200A |
Precise control technology, multiple ventilation modes |
1 |
2 |
Defibrillator monitor |
D500 |
easy to use |
1 |
3 |
Monitor |
M-9000E |
Two-way communication system |
1 |
4 |
Electrocardiograph |
ECG-12C |
Multiple working modes |
1 |
5 |
Electric suction device |
jx-820D |
High suction and low noise |
1 |
6 |
Infusion Pump |
WIT-601B |
Constant temperature device, adjustable temperature |
1 |
7 |
laryngoscope |
Ordinary fiber type |
Junior/Adult/Adult Large |
3 |
8 |
Negative pressure isolation chamber |
NP-320 |
Integrated body of emergency stretcher and isolation cabin for infectious patients |
1 |
p.s. if you need customizable equipment in an ambulance,you can ask for CLW Group
- Chassis Brand:ISUZU
- Size:8165×2480×3500mm
- Price:Starting at$55000
- Chassis Brand:DONGFENG
- Size:8450×2500×3500mm
- Price:Starting at$70000
- Chassis Brand:DONGFENG
- Size:5990×2000×2380mm
- Price:Starting at$15000
- Chassis Brand:DONGFENG
- Size:6940×2130×2800mm
- Price:Starting at$25000