Dodge truck winch mounts,CLW GROUP has cooperated with Mr. Xiao before. He is very satisfied with our company's pre-sales, in-sales and after-sales service. There is no worries when there is a demand again. When the project needs a larger capacity watering truck, Mr. Xiao will contact us immediately , Confirmed the watering truck configuration by phone, after agreeing on the price, the watering truck purchase and sale contract was signed soon. After commissioning before leaving the factory, Mr. Xiao was very satisfied with all the procedures and drove the 15m3 Dongfeng Tianjin watering truck. The journey home.
The refrigerated truck produced by CLW GROUP is equipped with guide rails and stainless steel hooks on the top of the compartment, which are used for hauling fresh meat products. The ventilation effect during transportation is good and it is convenient to hang and take. The cab is equipped with a temperature controller, which can control the refrigeration switch in the cabin, adjust the temperature or defrost functions. It can also be equipped with a separate ventilation slot. The bottom plate is made of aluminum pattern board or glass fiber reinforced plastic, and the periphery of the car body is 2.5mm aluminum alloy edging, which has a better ventilation effect.
The truck-mounted crane truck developed by CLW Group is suitable for factories, mines and urban construction, and the hoisting reducer is the main part of the crane for lifting heavy objects, so how to carry out routine maintenance? First of all, regularly check whether the connecting parts of the motor balance valve and the control oil pipe are loose and oil seepage Observe whether there are oil stains on the appearance of the reducer to determine whether the internal seals of the housing are ineffective and fail to seal At the same time, the hoisting wire rope should also be checked daily When the outer wire of the wire rope wears up to 40% of its diameter, or when the diameter of the wire rope is reduced by 7% or more from the nominal diameter, the wire rope should be scrapped; the wire rope has broken wires If the stock is broken, it shall be scrapped,dodge truck winch mounts.
CLW Group’s talent incentive system is an important guarantee for the company’s rapid development in the industry. For outstanding employees, we will have generous bonuses and broad promotion space as rewards. For employees or managers with outstanding contributions, the company will Option incentives are designed to allow employees to share the dividends brought by the company's development. At the same time, the company will use part of the income as an option incentive start-up fund every year to ensure that the interests of outstanding employees are consistent with the interests of the company.
The technology of repairing and changing tires is very important to driving safety. Today, the editor of CLW Group will lead you to understand the correct tire changing procedures. 1. Carefully unfold the inner tube, confirm that the inner tube is dry and not stained with dust or fine sand, then sprinkle some talcum powder on the inner tube, put the inner tube and the rim strap into the outer tube, inflate the inner tube and screw the valve; 2. Tire pads are placed obliquely on the wheel, and the valve is placed in the notch. Be careful not to tilt the valve. Lift the tire from the side of the valve and insert it into the rim; 3. Install the rim ring in turn, Place it in the notch of the wheel opposite the opening of the lock ring, first press one end of the ring, and then press the other end; 4. Fill the tire with half the specified value of air first, and verify that the bead has been all around the circumference .
