- Garbage Compactor Truck
- Side Load Garbage Truck
- Roll-off Garbage Truck
- Garbage Collection Truck
- Food Waste Garbage Truck
- Skip Garbage Truck
- Ambulance
- Mobile Clinic Vehicle
- Concrete Mixer Truck
- Truck-mounted Crane
- Refrigerated Truck
- Fire Engine
- Watering Truck
- Spraying Truck
- Street Sweeper
- Vacuum Truck
- Flatbed Transport Truck
- Aerial Work Platform Truck
- Tow Truck
- Dump Truck
- LPG Truck
- LPG Storage Tank
- LPG Semi-trailer
- LPG Filling Station
what are people who work in ambulences called
CLW GROUP provides a batch of compressed garbage trucks to Guiyang Municipal Environmental Sanitation Company. The truck has a volume of 5 cubic meters, adopts an Isuzu chassis, a 98 horsepower engine, and a brand multi-way valve group. The entire vehicle is a fully sealed type, self-compression, self-dumping, and compression. All the sewage enters the sewage tank, which completely solves the problem of secondary pollution during garbage transportation and avoids inconvenience to people. The key components are imported components, which have high pressure, good sealing, convenient operation, and safety. advantage!what are people who work in ambulences called
What are people who work in ambulences called,CLW Group Dongfeng Caput refrigerated car body repair measures 1 Repair of scratches and cracks on the inner and outer skins of the compartment The repair method usually adopts the "sanding and spraying method"; that is, the scratches and cracks are first polished into a rough surface, and then the mixed putty is evenly smeared on it After the putty is dry, it will be polished and polished, and finally painted 2 Repair of damaged insulation layer of refrigerated car body The repair method mostly adopts the "cutting compensation method", that is, cut off the damaged part of the insulation layer to a minimum area, and make the same size polyurethane insulation material and glass steel plate, and cover the insulation material with glass fiber felt and coat it with unsaturated poly Grease glue, paste the inner and outer glass steel plates,what are people who work in ambulences called.
What is the reason for insufficient or no pressure in the hydraulic system of the concrete mixer truck? First observe whether the hydraulic pump can output hydraulic oil. If there is no hydraulic oil output, it may be that the steering of the pump is incorrect, the parts are severely worn or damaged, the suction pipe has excessive resistance or air leakage. If it is a new hydraulic pump, it may be due to casting defects (shrinkage holes, blisters, etc.) in the pump body, which makes the suction chamber and the pressure chamber communicate, loses the oil pressure ability, and the input power is insufficient, so that the pump oil delivery pressure cannot reach the working level The pump shaft is twisted under pressure, and no oil can be output.
CLW GROUP has cooperated with Mr. Xiao before. He is very satisfied with our company's pre-sales, in-sales and after-sales service. There is no worries when there is a demand again. When the project needs a larger capacity sprinkler, Mr. Xiao will contact us immediately , Confirmed the sprinkler configuration by phone, after agreeing on the price, the sprinkler purchase and sale contract was signed soon. After commissioning before leaving the factory, Mr. Xiao was very satisfied with all the procedures and drove the 15m3 Dongfeng Tianjin sprinkler.
Construction is inseparable from engineering and various engineering vehicles. CLW group brings you a chassis evaluation of a heavy truck H5 front four rear eight 7.9 square mixer truck, hoping to help you buy it. The first thing to introduce is the engine, which is the core part of the vehicle. The 340-horsepower National V diesel engine of Sinotruk has six-cylinder in-line, supercharged and intercooled, and has the advantages of sufficient power, strong explosive power, and low noise. The transmission is selected from Sinotruk 10 gears, with high and low gears. This transmission has a forced lubrication function, which has a long service life and strong bearing capacity. The tire is made of 11.00R20 steel wire, which has the characteristics of light weight, low driving resistance, wear resistance and durability.
The new generation of road sweeper is a special road sweeping vehicle developed by our company. It is modified with a second-class chassis. It is mainly suitable for mechanized cleaning and cleaning operations in urban streets, municipal squares, and large factories and mines. The vehicle has high operating efficiency and technical performance. Advanced and reliable, beautiful appearance, with distinctive "CLW" brand characteristics. Among them, the hydraulic oil radiator is unique to CLW Group, which provides effective guarantee for the continuous work of the road sweeper.
The automatic submerged arc welding machine used by CLW Group: various technical indicators reach the first-class level, excellent welding performance, large welding depth, high strength, and beautiful appearance. The welding power supply adopts double anti-star thyristor rectification, high output power, 98% duty cycle; the trigger sequence function adopts thick film circuit, and the main and control loops are photoelectrically isolated, the circuit is simplified, and the reliability is high; the wire feeding motor is double feedback control, The output torque is large and stable; the walking trolley is easy to mechanically adjust, stable in walking, and suitable for various conditions.
- Chassis Brand:ISUZU
- Size:8165×2480×3500mm
- Price:Starting at$55000
- Chassis Brand:DONGFENG
- Size:8450×2500×3500mm
- Price:Starting at$70000
- Chassis Brand:DONGFENG
- Size:5990×2000×2380mm
- Price:Starting at$15000
- Chassis Brand:DONGFENG
- Size:6940×2130×2800mm
- Price:Starting at$25000