CLW GROUP specializes in the production of 3-25 tons of more than 98 varieties of watering trucks The products include Dongfeng Duoli, Dongfeng Tianlong, Tianjin, Jiefang series and other watering trucks Mr Zhang of Wenzhou has previously consulted two special vehicle manufacturers All applicable requirements and conditions could not be met Afterwards, Mr Zhang learned from a friend that Chengli Group can customize watering trucks with various functions according to customer requirements He immediately contacted our sales department to order 5 Tianjin series watering trucks The delivery of the vehicle was completed within 3 days,what are the ambulance beds called.
The box body of Dongfeng side loader garbage truck is made of four-carbon steel plate with three sides and three bottoms. There is a hanging bucket lifting mechanism on the front side of the box. It adopts a chain type. It is lifted by the oil cylinder. It can automatically lift the trash can to pour garbage. It has a self-unloading function. The rear is equipped with a rubber sealing strip to prevent sewage drips and hang trash. The car can be equipped with 120 or 240 liter plastic drums and iron drums according to customer requirements.
If the ambulance is not well maintained, it will cause damage to the major systems in the slightest, and will greatly reduce the service life of the vehicle. Only by scientifically maintaining trucks can the car's attendance rate be higher. Next, the editor of CLW Group will share a set of practical truck maintenance tips with card friends, pay attention to collection. 1. Reasonably add engine oil; 2. Add coolant after the engine is cooled; 3. Engine water temperature must be within a reasonable range; 4. After braking, the vehicle speed slows down and the clutch is stepped on; 5. The tires maintain standard air pressure. The most important thing is to make every trip more safe and secure!
The chairman of the board, Mr. Cheng Aluo, was born in a poor family. After going to college, he started to study part-time for tuition fees. Although he had heavy schoolwork, he could not lose his job. It was late at night after a busy day, but he always gritted his teeth and worked tirelessly in his studies. No matter how difficult the environment is, I always have the dream of creating a career in my heart. The hard work pays off, and there are as many gains as you pay. Today CLW Group is a top 500 private enterprise in the country, with annual sales exceeding 6 billion.
It refers to how to fix the gear shift when the truck is driving? CLW Group engineers said: When a gear is found to be shifted, still push the gear lever into that gear, and then remove the transmission cover to check the gear meshing If the gear meshes well, test the positioning device by pushing the shift fork of the skipped gear by hand If the positioning is poor, remove the shift fork shaft and inspect the positioning ball and spring If the gears are not fully meshed, push the shifted gears or gear sleeves by hand to properly mesh Check whether the shift fork is bent or worn, whether the shift fork fixing screws are loose, and whether the gap between the fork end and the gear groove is too large Big,what are the ambulance beds called.
