The CLW5043XLCJ6 refrigerated truck model of the JMC Shunda National Six Blue Brand refrigerated truck produced by CLW GROUP has started in batches! The truck uses Isuzu's 115-horsepower engine, the box is made of glass fiber reinforced plastic inside and outside, 8CM high-density insulation board, and anti-slip pattern aluminum plate at the bottom , The back door edging is made of stainless steel, and the refrigerated truck refrigeration unit: optional -5 degrees (refrigeration) or -15 degrees (freezing), the temperature can be adjusted.
What does ambulance mean in turkish,The cleaning and sweeping truck produced by our company is a multi-functional vehicle. The main function is to undertake the cleaning, washing and cleaning operations of roads such as urban areas, national highways and expressways. The vehicle is equipped with two brush plates and a central wide suction cup. , Or four-pan sweep, rear suction mouth. Types of road work vehicles. The sweeper has many functions such as road cleaning, road scrubbing, high-pressure cleaning, curb scrubbing, garbage collection, sewage recycling, spraying, and road separation wall cleaning.
What does ambulance mean in turkish,If the abnormal color of the exhaust gas is the most common fault during the driving of the truck mounted crane, what causes it? The CLW Group editor's analysis and answers are as follows: 1. The exhaust gas is black because the fuel oil is not completely burned. Sensors related to intake air should be checked. 2. The fuel does not meet the combustion standard, or the moisture in the gasoline will emit white tail gas. Check the spark plug failure and fuel quality.3. The exhaust gas is blue, which may be caused by the excessive wear of the piston ring or the matching of the oil ring, causing the oil to flow up and enter the combustion chamber, or the oil seeping from the valve guide participates in the combustion. The spark plugs or valve oil seals should be checked for problems, and they should be checked in time and replaced with new ones if necessary.
Hu Linfeng is the marketing director of CLW Group. Under the leadership of Mr. Hu Linfeng, the company’s sales team has continuously carried out training and learning to ensure that they can advance bravely in the increasingly competitive market and take root in the industry. Under the supervisor, conduct business training three times a week, collect related problems, organize problems and solutions to the system, continuously improve the professional knowledge and service skills of sales staff, actively cultivate service awareness, and strengthen the team’s collaboration and coordination.
How to solve the common problem of non-absorption of sprinkler pumps? CLW Group will answer for you. The first step is to check whether the switch is turned on. The second step is to check the filter. When the sprinkler pump is not working well, check whether there is debris blocking the water inlet on the front filter of the suction pipe, and then check whether the water inlet pipe is sealed step by step, and check whether there is an air leakage failure. The third step is to check the vacuum. The water diversion height of the water pump used by ordinary sprinklers should be less than 5 meters, and then check whether the oil seal of the water pump of the sprinkler is damaged. Leakage of the pump shaft affects its vacuum, and the seal should be replaced. The fourth step is to check the power take-off. Check whether the power take-off of the sprinkler is working. The separation of the power take-off from the drive shaft will cause the water pump to fail to work.
