- Garbage Compactor Truck
- Side Load Garbage Truck
- Roll-off Garbage Truck
- Garbage Collection Truck
- Food Waste Garbage Truck
- Skip Garbage Truck
- Ambulance
- Mobile Clinic Vehicle
- Concrete Mixer Truck
- Truck-mounted Crane
- Refrigerated Truck
- Fire Engine
- Watering Truck
- Spraying Truck
- Street Sweeper
- Vacuum Truck
- Flatbed Transport Truck
- Aerial Work Platform Truck
- Tow Truck
- Dump Truck
- LPG Truck
- LPG Storage Tank
- LPG Semi-trailer
- LPG Filling Station
what does an ambulance cost to buy
The Dongfeng Liuqi corrosive goods van produced by CLW GROUP this time is a product for customers in Liaocheng, Shandong. The car body is made in strict accordance with the size of the announcement. The outer plate is made of 1mm thick cold-rolled plate with one-time shaped shutters. The aluminum plate decorated with good electrical conductivity has vent holes, the inner lining is a rectangular tube frame that is firm and stable, and the interior is filled with breathable, moisture-proof and flame-retardant extruded board. The four materials are compounded by modern technology to ensure the tightness of the car body Related national mandatory standards.
How to solve the common problem of non-absorption of sprinkler pumps? CLW Group will answer for you. The first step is to check whether the switch is turned on. The second step is to check the filter. When the sprinkler pump is not working well, check whether there is debris blocking the water inlet on the front filter of the suction pipe, and then check whether the water inlet pipe is sealed step by step, and check whether there is an air leakage failure. The third step is to check the vacuum. The water diversion height of the water pump used by ordinary sprinklers should be less than 5 meters, and then check whether the oil seal of the water pump of the sprinkler is damaged. Leakage of the pump shaft affects its vacuum, and the seal should be replaced. The fourth step is to check the power take-off. Check whether the power take-off of the sprinkler is working. The separation of the power take-off from the drive shaft will cause the water pump to fail to work.
What are the sanitation vehicles of CLW Group? There are many types of sanitation trucks, such as common garbage trucks, sprinklers, sweeping trucks, sewage suction trucks, sewage treatment trucks, dust suction trucks, high-pressure cleaning trucks, etc. Each model is subdivided into several models, and each model also has different performance and subtle functions. Users can choose the appropriate type and model according to their needs and site conditions. As for the configuration, they can be selected according to requirements.
What does an ambulance cost to buy,CLW GROUP has successively received orders for transport vehicles during this period, which has ushered in an order for 2 van transport vehicles from Guangxi Jiapurui Chemical Products Co., Ltd. This time, the customer purchased the first four and six miscellaneous dangerous goods van transporters after the National Fifth Liberation. Vehicle model: CA5310XZWP1K2L7T10E5A80, chassis model: CA1310P1K2L7T10BE5A80, the chassis adopts Jiefang Han V cab, National V Xichai CA6DL1-26E5, 260 horsepower, Shaanxi tooth 9-speed gearbox, 457 welded bridge, 295/80R22.5 layer tires, Electric doors and windows, electric lift, front exhaust pipe, front disc and rear drum brake, exhaust spark extinguisher.
Dayun 12 TON water truck review: The size of the vehicle is 7900X2490X3150 (mm), the wheelbase is 4500mm, and the size is moderate, but it is enough to support 12 tons of water and load-bearing performance levers! Using Yuchai engine, Yuchai's engine is low in sound and high in horsepower, so I don't need to make more introductions. The key is low fuel consumption, easy maintenance, relatively cheap price, and tailor-made for mountain roads and construction sites. The tire uses a 9.00 steel tire, which has a large ground contact area, small tread slip, good adhesion, low rolling resistance, and a relatively long service life. The square fuel tank is located on the inner side of the protective fence and is well protected.
With the advancement of science and technology, the technology, intelligence, practicality and comfort of special cars have become the new vane of the market. CLW Group independently researched and developed fire trucks with functions such as lifting, self-rescue/towing, obstacle clearance, power generation, lighting, etc., and can be equipped with a large number of firefighting equipment or tools such as demolition, detection, leak plugging, protection, etc.; the interior of the vehicle equipment box is made of aluminum Alloy profile adjustable modular structure, reasonable spatial layout, safe and convenient tool access, belongs to special service fire trucks, widely used in firefighting forces, responding to various natural disasters, emergencies, emergency rescue, rescue and other fields, compared with similar types in the market The product has more complete functions and high cost performance.
What does an ambulance cost to buy,At present, CLW Group has the qualifications for vehicle (including chassis) manufacturing, passenger car manufacturing, new energy vehicle qualifications, special vehicle manufacturing qualifications, fire truck manufacturing qualifications, crane manufacturing qualifications, and pressure vessel manufacturing qualifications It is the current automobile manufacturing enterprise qualification The most complete company, Chengli Specialty Automobile, a subsidiary of Chengli Group, has developed into the largest industry leading enterprise in China It is worthy of being the leader of today's special-purpose vehicle manufacturers,what does an ambulance cost to buy.
- Chassis Brand:ISUZU
- Size:8165×2480×3500mm
- Price:Starting at$55000
- Chassis Brand:DONGFENG
- Size:8450×2500×3500mm
- Price:Starting at$70000
- Chassis Brand:DONGFENG
- Size:5990×2000×2380mm
- Price:Starting at$15000
- Chassis Brand:DONGFENG
- Size:6940×2130×2800mm
- Price:Starting at$25000