- Garbage Compactor Truck
- Side Load Garbage Truck
- Roll-off Garbage Truck
- Garbage Collection Truck
- Food Waste Garbage Truck
- Skip Garbage Truck
- Ambulance
- Mobile Clinic Vehicle
- Concrete Mixer Truck
- Truck-mounted Crane
- Refrigerated Truck
- Fire Engine
- Watering Truck
- Spraying Truck
- Street Sweeper
- Vacuum Truck
- Flatbed Transport Truck
- Aerial Work Platform Truck
- Tow Truck
- Dump Truck
- LPG Truck
- LPG Storage Tank
- LPG Semi-trailer
- LPG Filling Station
what does modified independent ambulation
What does modified independent ambulation,CLW GROUP provides a batch of compressed garbage trucks to Guiyang Municipal Environmental Sanitation Company. The truck has a volume of 5 cubic meters, adopts an Isuzu chassis, a 98 horsepower engine, and a brand multi-way valve group. The entire vehicle is a fully sealed type, self-compression, self-dumping, and compression. All the sewage enters the sewage tank, which completely solves the problem of secondary pollution during garbage transportation and avoids inconvenience to people. The key components are imported components, which have high pressure, good sealing, convenient operation, and safety. advantage!
Whether the sprinkler can work normally depends on the power take-off. Once the sprinkler can’t sprinkle water, check the power take-off carefully. The editor of CLW Group will show you the specific solutions: Method 1: Check the solenoid valve, yes It is not because the solenoid valve is short-circuited to cause damage, if it is determined to replace the solenoid valve with a new one. Method 2: Check whether the drive shaft between the power take-off and the water pump is rotating. If it does not rotate, you can be sure that there is a problem with the power take-off and the solenoid valve at this time. Method 3: If the above two conditions are eliminated, the power take-off on the sprinkler gearbox must be disassembled at this time to check whether the bearings are worn and damaged.
Many friends know that there is a certain danger in transporting dangerous goods, and would like to know how to improve safety? Here CLW Group, as a professional manufacturer of dangerous goods transport vehicles, reminds users: 1. The cargo box of van-type dangerous goods transport vehicles should be made of wooden floor, so as to avoid sparks; if iron floor is used, the corresponding lining should be used. Pad protection; 2. The material of the tank (tank) body of the tank (tank) truck must be compatible with the nature of the cargo. 3. Take corresponding measures to restrict the risk factors of various dangerous goods.
The latest 3 sets of Dongfeng Tianlong’s latest production of 3 Dongfeng Tianlong 32-ton aluminum alloy oil trucks, the front four and the rear eight are three brothers from Hanzhong. The truck is suitable for the transportation of dangerous goods. Customers have high requirements for product safety and performance. Later, I chose Chengli Group, the most professional procurement company in the professional car industry, to prove once again from the side that, regardless of brand effect, product quality or reputation in the industry, Chengli is the top special-purpose car manufacturer in China. After receiving the product, the customer repeatedly praised: "I did not choose the wrong one.
What does modified independent ambulation,Among the special vehicles, there is a category of vehicles called dangerous goods transport vehicles. However, there are also many types of dangerous goods transport vehicles, which are classified according to the type of goods transported. Let's take a look at the chassis configuration of this Dongfeng 3m flammable gas van with CLW group. The chassis of the car is equipped with Dongfeng Microcard Tuyi T5 series chassis, the height of the car is controlled within 2.1 meters, and there is no pressure to travel in the city. The engine uses Wuling Liuji gasoline engine code-named LJ4A15Q6, 112 horsepower, maximum torque of 147nm, five-speed gearbox. The front and rear axles adopt leaf spring suspension, and the 3 tons rear axle reinforced manganese steel 75mm wide frame. The rear axle is equipped with rear twin tires to further strengthen the loading performance.
The seamless welding technology of watering truck produced by CLW Group. The welding device uses a transistor function device to convert the current 50/60Hz electric frequency into 20KHz or 40KHz high-frequency electric energy and supply it to the converter. The converter converts electrical energy into mechanical vibration energy for ultrasonic, and the voltage regulator is responsible for transmitting the converted mechanical energy to the welding head of the ultrasonic welding machine. The entire cycle is usually completed in less than one second, but its welding strength is close to A piece of connected material.
What does modified independent ambulation,The dust-free water spinner coating machine owned by CLW Group: This equipment meets European environmental protection standards, the product has a one-time forming coating effect, its appearance is shiny and no environmental pollution. Dust-free coating is a fully enclosed production workshop composed of steel sandwich panels, which can effectively control the pollution of products by undesirable air and reduce the defective rate of dust and products in the spraying room. CLW Group is also currently the most complete and advanced manufacturer of modified vehicles.
- Chassis Brand:ISUZU
- Size:8165×2480×3500mm
- Price:Starting at$55000
- Chassis Brand:DONGFENG
- Size:8450×2500×3500mm
- Price:Starting at$70000
- Chassis Brand:DONGFENG
- Size:5990×2000×2380mm
- Price:Starting at$15000
- Chassis Brand:DONGFENG
- Size:6940×2130×2800mm
- Price:Starting at$25000