After the transformation and upgrading of the CLW GROUP municipal sanitation vehicle, the Chengli special vehicle assisted in Azerbaijan was recently delivered to use. Cheng Li wants to start with the most basic and most commonly used models. It is to change people's long-term external image of low-cost Suizhou products, starting with bit by bit changes. Advocate precision manufacturing, keep improving, and implement a zero defect and zero tolerance management mechanism for assembly workers, welders, painting and other production processes.
The heavy-duty upper beam of the Dongfeng flatbed transporter is made of 8mm thick square steel, the whole through-type design, and the bearing performance is better. The cargo box flat 8mm thick checkered plate, the ladder adopts a heavy-duty reinforced design, and adopts three reinforcement double springs. With rear outriggers, the flatbed has diagonal supports, the flatbed of the cargo box can be extended and retracted by 3 meters, retracted by 2.5 meters, and the length of the flatbed of the box is 7.5 meters. It is the most ideal trailer for transporting large excavators and large construction machinery.
The high-pressure cleaning vehicle is also called the pipe dredging vehicle. The blocked pipeline is opened by the strong pressure generated by the high-pressure water flow. After purchasing the high-pressure cleaning vehicle, many customers pay little attention to the daily maintenance of the high-pressure cleaning vehicle, which has seriously shortened the high-pressure cleaning vehicle. The following is the CLW Group sales department to introduce you to the maintenance knowledge of high-pressure cleaning vehicles: 1. Regularly replace the oil and filter element; 2. Regularly clean the crankcase; 3. Keep the oil axle box ventilated and smooth; 4. Regularly maintain the water tank; 5. Clean the fuel system regularly; 6. Add fuel in time.
What is an ambulance attendant,Director Ni Wenjin set up the CLW Group's technical team. Through continuous innovation, brave breakthroughs, steady and steady operations, he conducted multiple tests of steel-lined plastic wave-proof board, and finally developed a chemical tank with steel-lined plastic wave-proof board. The back of the wave board is steel structure. , Surface point steel wire mesh, lined with plastic PE, has the advantages of no welding seam, no leakage, non-toxicity, anti-aging, impact resistance, corrosion resistance, long life, and compliance with sanitary standards, which makes up for the defects of traditional tanks. Won the national patent, is the company's star product.
Other emergency methods of CLW Group sewage suction trucks: 1 Oil leakage at the oil pipe joints When the sewage suction truck is in use, if there is oil leakage from the engine oil pipe joints, this situation is mostly caused by the poor sealing of the oil pipe horn and the oil pipe nut At this time, you can use cotton yarn to wrap around the lower edge of the horn, and then tighten the tubing nut and tubing joint You can also chew gum or maltose into a paste and apply it to the seat of the tubing nut When it dries, it can play a sealing role 2 The fan belt is broken At this time, you can wrap the broken belt with iron wire, or use the start-stop method to drive the car away 3 If the tubing is ruptured, in this case, wipe the rupture clean first, apply soap or use tape to wrap around the rupture of the tubing, tie it up with iron wire, and then apply a layer of soap,what is an ambulance attendant.
