CLW GROUP recently successfully delivered a 15-square water truck to the customer. The customer spoke highly of the car's interior refinement, luxury, comfort, engine sound, and vehicle assembly. The full set of watering truck pipes for 15 square watering trucks are made of seamless steel pipes, and the exterior is painted with zinc plating, which is not only beautiful, but also can prevent rust. All watering truck system valves are pneumatically controlled, and the pneumatic switch is integrated in the cab for operation. Save labor cost and reduce labor intensity of operators.
What is cardiac ambulance,The cleaning and sweeping truck produced by our company is a multi-functional vehicle. The main function is to undertake the cleaning, washing and cleaning operations of roads such as urban areas, national highways and expressways. The vehicle is equipped with two brush plates and a central wide suction cup. , Or four-pan sweep, rear suction mouth. Types of road work vehicles. The sweeper has many functions such as road cleaning, road scrubbing, high-pressure cleaning, curb scrubbing, garbage collection, sewage recycling, spraying, and road separation wall cleaning.
What aspects should be paid attention to when using the "CLW"" Dongfeng kitchen garbage truck? 1. It is strictly forbidden to put construction waste into the kitchen garbage truck to avoid damage to the parts. 2. If the hydraulic system of the kitchen garbage truck is operating abnormally, Work should be stopped immediately, analyze the cause, eliminate the fault, and do not force pressure to work. 3. Whether it is engaging or disengaging the power take-off, you must step on the clutch pedal; the power take-off and multi-way reversing valve are in working condition At the time, the garbage must not enter the driving state. 4. The pressure regulating device of the hydraulic system is the pressure regulating bolt on the multi-way reversing valve. After the pressure is adjusted and locked, the bolt should not be arbitrarily adjusted during use.
The CLW Group, founded by CEO Cheng Aluo, is well-known in the Chinese special-purpose vehicle industry. Facing the increasingly competitive market, he proposed a differentiated product strategy and a strategic plan to increase production capacity, so that "CLW" can be In the process of development, we successfully overcome challenges again and again and become one of the leading enterprises in China's special automobile manufacturing. All this is due to the group's leading strategic vision, hard work and determination at the same time.
What is cardiac ambulance,Today, the editor summarizes what are the common faults of the high-pressure cleaning trucks produced by CLW Group? 1. When the power switch of the high-pressure cleaner is turned on, although the machine has a high-voltage output, the cleaning effect is not very good. Causes: The temperature of the liquid in the cleaning tank is too high, the selection of the cleaning fluid is inappropriate, the high-pressure frequency coordination is not adjusted properly, and the level of the cleaning fluid in the cleaning tank is not appropriate. 2. The DC fuse of the high-pressure cleaner has a fusing failure. Cause: The rectifier bridge stack or the power tube is burnt out, or it is caused by the failure of the transducer. 3. When the power switch of the high pressure washer is turned on, the indicator light is on, but the high voltage is not output.
