CLW GROUP is able to order two more watering trucks for Mr. Liu’s project this time. It is based on the pleasant cooperation with Mr. Liu on the previous supply and demand. The sales staff of the company pays great attention to the needs of old customers and will pass it every time. Professional and meticulous communication, earnestly understand the customer's engineering situation, and then determine the watering truck configuration according to the site, climate, road, etc., and get the customer's approval before signing the contract and putting it into production. The whole process is meticulous and smooth, making the customer personal Actually feel the joy of contentment.
The CLW Group road sweeper is modified from the chassis, power system, fan drive system, sprinkler system, hydraulic system, electrical system, cleaning device, sub-frame, trash bin, etc. The tipping of the trash bin, the opening and closing of the back door of the trash bin, the rotation of the sweeping plate, and the lifting of the suction nozzle are all hydraulically driven and controlled by electricity and hydraulic. The principle is to clean the road surface.
The "CLW" garbage truck warms up and then starts. In winter, the temperature is low. Warm up the car for one to three minutes before going out. Let the water temperature reach 40°C before starting. The specific steps are as follows: 1. Hang against the start and step on the accelerator slowly Pedal and accelerate slowly. When the watering truck reaches a certain gear speed, learn to listen to the sound of the watering truck engine to gradually change the gear from low speed to high. 2. Keep high gears to save fuel. Generally speaking, garbage trucks should use high gears to tow gears as much as possible, learn to listen to the sound of the engine to shift gears, and understand the situation of the vehicle. When the engine is about to "shake", the gear must be lowered to allow the vehicle speed to increase and then change back to high gear.
After Professor Ni Wenjin became the technical director, he set out to formulate a standard production process, a strict quality inspection system, and standardized operations After the company expanded its production capacity, it firmly established a domestic first-class production line, which not only improved production efficiency, It also ensures that the quality of the products is consistent Facts have proved that the company has been developing and growing, whether it is industry reputation or customer reviews It is believed that under the leadership of Professor Ni, CLW Group will definitely create more surprises,what to.do.during an ambulance siren.
What to.do.during an ambulance siren,The car lights are the eyes of the "CLW" sprinkler, especially at night, if your reversing lights have problems, they are likely to be bumped due to vision problems. The following editor will take you to understand the cause of the reversing light failure and the correct steps for troubleshooting: 1. If the reversing lights on both sides are not on, you should first check whether the fuse is open. If it is normal, proceed to the next inspection. 2. Put the gear of Hubei Chengli sprinkler into reverse gear, and check whether the voltage on the lamp holder and the black wire is normal. 3. If there is still no problem, check whether the reversing bulb is damaged and whether the grounding wire is in good contact. If the voltage is zero, check whether the voltage of the black wire at the reverse light switch is normal.
