- Garbage Compactor Truck
- Side Load Garbage Truck
- Roll-off Garbage Truck
- Garbage Collection Truck
- Food Waste Garbage Truck
- Skip Garbage Truck
- Ambulance
- Mobile Clinic Vehicle
- Concrete Mixer Truck
- Truck-mounted Crane
- Refrigerated Truck
- Fire Engine
- Watering Truck
- Spraying Truck
- Street Sweeper
- Vacuum Truck
- Flatbed Transport Truck
- Aerial Work Platform Truck
- Tow Truck
- Dump Truck
- LPG Truck
- LPG Storage Tank
- LPG Semi-trailer
- LPG Filling Station
where to buy a retired fire truck
Where to buy a retired fire truck,This time, CLW GROUP used Dongfeng 498 engine, 5-speed gearbox, 7.00-16 tires for the Dongfeng Xiaodolika compression garbage truck for Baobei Baojing customer production plant. Flip, with sewage tank, with manual hydraulic operating system, manual electric dual control, side-mounted controller, hydraulic pressure is electromagnetic control, the box body is arc channel steel frame. The new arc-shaped design box body refuses to weld and crack. The box body is stronger and has a longer service life.
Many driver friends said that the engine of a special car sometimes overheats during driving, and they don't know what to do when encountering this situation. The CLW Group technicians gave some opinions. When the engine is running, the coolant temperature is prone to be too high. Once the cooling temperature exceeds the normal value, the engine cannot dissipate heat normally, which will cause the engine to overheat and affect the normal operation of the engine. The main reasons for the abnormal operation of the cooling system: thermostat failure, radiator failure, fan not rotating, water tank blocked, etc. The car dashboard prompts that when the coolant temperature is abnormal, stop and check to see if the coolant leaks.
Where to buy a retired fire truck,Now that it is understood that the valve water is frozen and cracked because of the water stored in it, how can I clean the water? 1. Open the 45-80 degree self-flow valve to ensure that the remaining water in the tank is drained. 2. Open all pipe manual ball valves (including all outlet valves and return valves). 3. Turn on all the front spray, rear spray and side spray electronic control switches on the center console of the cab; turn on all the pipelines and the drain nozzle at the bottom of the pump until all remaining water in the tank and pipelines is released. This is the method summarized by CLW Group for you.
CLW GROUP has produced a variety of dangerous goods and chemical transport vehicles before. The medium stored by the customer this time is: ammonia solution, sodium hydroxide solution, sulfuric acid and other corrosive chemical solutions packed in independent containers (bottles), which will affect the car body The tightness and safety of the product have high requirements. According to customer needs, our company chooses high-quality materials that are resistant to acid and alkali to make the body. It is produced in strict accordance with the process flow and the highest level of quality inspection is used. Do not let customers feel at ease and rest assured during use.
With the increasing requirements of various governments for environmental protection, the demand for fog cannons and dust suppression is increasing day by day Let's take a look at the configuration of this Dongfeng Tianjin 80m fog cannon and dust suppression truck with CLW group Chassis part: adopts Dongfeng original high-end series semi-plated cab, Cummins 180 horsepower engine, Dongfeng 6-speed gearbox, 47 meters wheelbase, 45T front axle, 9T single-stage reduction rear axle The upper part: the tank volume is 8 cubic meters, the tank has a thick epoxy anti-corrosion coating, the Veyron 60/90 water pump, all of which use seamless pipes, and is also equipped with a 16MAP pressure gauge and a pure copper filter Fog cannon unit: This car is equipped with a Huali 80-meter fog cannon and a 50Kw jade frame brushless ESC auxiliary generator set, covering an area of 13400/20000 square meters,where to buy a retired fire truck.
The technological advantages of CLW Group wreckers are embodied in: 1. The blanking of metal structural parts adopts profiling cutting, CNC wire cutting machines, and shearing machines for fully mechanized production. 2. The support arm and boom of the wrecker are all made of high-strength manganese steel plate, which is formed by bending. Carbon dioxide shielded welding only allows two welds, with less welds, small deformation, high precision and strength, and has been tested by ultrasonic welds. 3. The hydraulic steel pipes that have the greatest impact on the reliability of the hydraulic system are all processed through the following special processes: inner surface shot peening-pickling, washing-passivation-sealing-electrophoresis, and the inner surface of the tubing needs to be cleaned-blow dried-passed before assembly Oil rust prevention and other procedures effectively ensure the stability of the entire hydraulic system.
At present, CLW Group has the qualifications for vehicle (including chassis) manufacturing, passenger car manufacturing, new energy vehicle qualifications, special vehicle manufacturing qualifications, fire truck manufacturing qualifications, crane manufacturing qualifications, and pressure vessel manufacturing qualifications. It is the current automobile manufacturing enterprise qualification The most complete company, Chengli Specialty Automobile, a subsidiary of Chengli Group, has developed into the largest industry leading enterprise in China. It is worthy of being the leader of today's special-purpose vehicle manufacturers.
- Chassis Brand:ISUZU
- Size:8165×2480×3500mm
- Price:Starting at$55000
- Chassis Brand:DONGFENG
- Size:8450×2500×3500mm
- Price:Starting at$70000
- Chassis Brand:DONGFENG
- Size:5990×2000×2380mm
- Price:Starting at$15000
- Chassis Brand:DONGFENG
- Size:6940×2130×2800mm
- Price:Starting at$25000