This time, CLW GROUP used Dongfeng 498 engine, 5-speed gearbox, 7.00-16 tires for the Dongfeng Xiaodolika compression garbage truck for Baobei Baojing customer production plant. Flip, with sewage tank, with manual hydraulic operating system, manual electric dual control, side-mounted controller, hydraulic pressure is electromagnetic control, the box body is arc channel steel frame. The new arc-shaped design box body refuses to weld and crack. The box body is stronger and has a longer service life.
Why are ambulance standards called kkk,The Ford chassis ambulance produced by CLW Group adopts cabinet assembly design, equipped with first aid box, chest of drawers, sink and folding seat, which allows medical staff without leaving the seat and wearing a seat belt Perform nursing operations. The on-board inverter charging integrated power supply with charging function, stable frequency, voltage and output power, ensure the normal operation of medical staff. Optional dedicated vehicle on-board oxygen centralized control system can observe high and low pressure meters. When the patient breathes, the oxygen can be adjusted at a constant pressure, which is durable and does not leak.
What aspects should the daily maintenance of the watering truck start? The CLW Group sales staff answered as follows: 1 Frequently check the sealing conditions of the connections, switches, and water absorption hoses of the water system If leakage is found, restore or replace the seals 2 Regularly check the fixing conditions of the water tank, pump frame, and bracket of the watering truck All nuts should be tightened to ensure that the connection is tight and reliable 3 Frequently check the connection between the power take-off of the watering truck and the water pump The connection should be reliable and running normally If oil leakage is found in the power take-off and the water pump during use, the seal should be replaced,why are ambulance standards called kkk.
After years of continuous exploration, summarization and accumulation, CLW Group has formed a corporate culture system centered on "proactive, happy and harmonious", which provides a strong spiritual foundation for the company's rapid, stable and sustainable development. CLW Group has established its own vocational school while developing and growing on its own, continuously delivering talents to the industry. The ultimate corporate goal is to develop to achieve employee growth, customer satisfaction, government at ease, promote economic development, and social harmony.
I believe that one of the most common problems encountered by car friends is that the clutch of the special car is shaking. The following CLW Group will let you know about the relevant maintenance knowledge. 1. The friction lining of the driven disk should be cleaned, repaired or replaced due to oily dirt, cracks, unevenness or exposed rivets. 2. If the pressure plate and driven plate are unevenly worn or warped, the pressure plate and driven plate should be repaired or replaced. 3. The torsional vibration spring of the friction plate of the driven disk fails, and the driven disk should be replaced. 4. The spline of the clutch driven disc is worn out and should be replaced. 5. The deformation of the first shaft of the transmission exceeds the limit and should be replaced.
