- Garbage Compactor Truck
- Side Load Garbage Truck
- Roll-off Garbage Truck
- Garbage Collection Truck
- Food Waste Garbage Truck
- Skip Garbage Truck
- Ambulance
- Mobile Clinic Vehicle
- Concrete Mixer Truck
- Truck-mounted Crane
- Refrigerated Truck
- Fire Engine
- Watering Truck
- Spraying Truck
- Street Sweeper
- Vacuum Truck
- Flatbed Transport Truck
- Aerial Work Platform Truck
- Tow Truck
- Dump Truck
- LPG Truck
- LPG Storage Tank
- LPG Semi-trailer
- LPG Filling Station
why aren't ambulances covered by tax
CLW GROUP sent away the second batch of Dongfeng Duolika D6 swing arm garbage truck transport convoy sent to Yinchuan in the misty rain. The previous batch of garbage trucks ordered by Yinchuan municipal management department has been used well. This is the second batch. Orders. This batch of garbage trucks is equipped with a unified supporting hydraulic lifting assembly, and the national unified swing-arm garbage hopper is loaded and transported through the left and right arms. It can be multiple buckets in one vehicle and has a self-unloading function to achieve safety, stability and reliable performance.
The editor of CLW Group today introduces the common faults and troubleshooting methods of Chengli wrecker trucks: 1. The boom telescopic speed is slow and weak. Reason: 1,failure of hydraulic power system;failure of telescopic mechanism control valve and overflow valve; troubleshooting method: check, adjust;disassemble, clean, adjust or replace damaged components. 2. Telescopic vibration of wrecker boom. Reason: The problem of the boom slider;The telescopic cylinder is abnormal; troubleshooting: The lubrication between the sliding surface of the boom box and the slider is insufficient, grease should be applied; the surface of the slider is too deformed, the slider should be replaced ; The surface of the boom is damaged, the surface should be ground;check and deal with it.
So how to clean the bearings? Generally speaking, the CLW Group senior engineer said: the cleaning agent should be neutral non-water-containing diesel or kerosene, and sometimes use warm lye as needed, and avoid using acidic solutions for contact and cleaning No matter which cleaning agent is used, it must be filtered frequently to keep it clean In addition to frequent cleaning, the proper selection of bearing materials is still a factor that must be considered in bearing failure analysis to avoid sudden and early failure of sprinkler bearings,why aren't ambulances covered by tax.
In order not to affect the customer's construction period, the workers of CLW GROUP worked overtime and worked non-stop to make the sprinklers. At the same time, they have high standards and strict requirements in the production process of all links, and the excellence is not sloppy at all. After four days of hard work by the workers and masters, the 15-cubic Dongfeng Tianjin water truck was finally built and presented to the customers perfectly. So when the customer saw this high-quality sprinkler truck, they couldn't help giving a thumbs up to the staff!why aren't ambulances covered by tax
CLW group today brings a comprehensive test of Dongfeng sewage suction truck evaluation with both strength and fashion. The biggest feeling of this car is that it is very shiny. The blue and white tank color is like blue sky and white clouds. The whole car is 8.4 meters long, 2.55 meters wide and 3.5 meters high. The cab has a semi-flat roof structure. The commonly used cab structure of Dongfeng medium trucks, rear-view mirrors, blind mirrors, and floor mirrors cooperate with each other to effectively reduce blind areas of vision. Cummins 210 horsepower is used for the whole vehicle engine, which has low noise, low fuel consumption and durability. The water circulation type selected for the upper sewage suction pump has stable and reliable operation, simple operation and convenient maintenance. The tank body is made of 6mm thick high-quality carbon steel, which is not easy to be deformed.
CLW Group's new product—hoisting type garbage truck. This is a hoisting type garbage truck that is a perfect combination of compression type garbage truck and truck-mounted crane. It adopts FAW Jiefang chassis. Compared with conventional bucket type garbage trucks, it has 360 It can be hoisted to any trash can or supporting special trash truck with a high degree of rotation, with the advantages of large hoisting tonnage and high compression efficiency. The truck makes full use of the gravity of the garbage and the height of 2.5 meters to achieve self-compression. The specific gravity of the garbage is higher than that in the ordinary plastic bin, and the storage efficiency of the garbage bin is further improved.
The sludge truck produced by CLW Group adopts a solid chassis, strong engine power and a comfortable driving experience It mainly produces 5-6 square tank sludge trucks, 8-10 square tank sludge trucks, and 12 square tank sludge trucks Mud truck, 16 square tank sludge truck, 18 square tank sludge truck, 20 square tank sludge truck The tank sludge trucks produced by our company are of high quality, and the service is guaranteed, with 7*24 support before, during and after sales,why aren't ambulances covered by tax.
- Chassis Brand:ISUZU
- Size:8165×2480×3500mm
- Price:Starting at$55000
- Chassis Brand:DONGFENG
- Size:8450×2500×3500mm
- Price:Starting at$70000
- Chassis Brand:DONGFENG
- Size:5990×2000×2380mm
- Price:Starting at$15000
- Chassis Brand:DONGFENG
- Size:6940×2130×2800mm
- Price:Starting at$25000