- Garbage Compactor Truck
- Side Load Garbage Truck
- Roll-off Garbage Truck
- Garbage Collection Truck
- Food Waste Garbage Truck
- Skip Garbage Truck
- Ambulance
- Mobile Clinic Vehicle
- Concrete Mixer Truck
- Truck-mounted Crane
- Refrigerated Truck
- Fire Engine
- Watering Truck
- Spraying Truck
- Street Sweeper
- Vacuum Truck
- Flatbed Transport Truck
- Aerial Work Platform Truck
- Tow Truck
- Dump Truck
- LPG Truck
- LPG Storage Tank
- LPG Semi-trailer
- LPG Filling Station
why do ambulances carry patients backwards
CLW GROUP Dongfeng Xiaodolika compression garbage truck has won the bid again! Thirty brand-new Dongfeng garbage trucks lined up neatly, stretching dozens of meters across the factory street, ready to go, rushing to their hometown-Baojing, Hebei The hydraulic system of this batch of trains adopts Italian imported Hyva hydraulic, with high pressure, fast oil return speed, stable performance, stronger compression ratio, and no oil leakage The electronic control system adopts Siemens intelligent PLC device, one-key operation, and the cab and carriage can be operated separately, which is fast and convenient, and the operation is sensitive,why do ambulances carry patients backwards.
Why do ambulances carry patients backwards,Chengli Fecal Suction Truck has the characteristics of high suction efficiency, self-priming and self-discharging and straight tank, which is quick and easy to operate. The main functions are suction and suction of manure, sewage, sludge and liquid mixed with small suspended and floating debris. The equipped vacuum pump is self-priming and self-discharging, with fecal window, cleaning port and self-flow valve. It is mainly composed of power take-off, drive shaft, vacuum suction pump, water-gas separator, oil-gas separator, water-gas separator, fecal tank, fecal suction gun, clean water tank, fecal window, vacuum pressure gauge and pipe network system, etc. composition.
Some parts of the watering truck chassis are more likely to be damaged than the engine, but when it comes to maintenance, everyone often pays attention to the engine and ignores these parts. Let's take a look at the editor of CLW Group. 1. Shock absorber: Oil leakage is a precursor to damage to the shock absorber. When we sprinkle water on the road with bad road conditions, increased turbulence or longer braking distance is a precursor to damage to the shock absorber. 2. Steering tie rod: The slack of the steering tie rod seriously affects driving safety. Therefore, when we are doing maintenance, we must check the parts. 3. Exhaust pipe: The exhaust pipe is one of the most easily damaged parts at the bottom of the vehicle. Don't forget to check it during maintenance.
The main structure of the CLW Group team consists of the board of directors, chairman, general manager, sales department, online e-commerce department, administrative logistics department, human resources department, inspection department, technology department, purchasing department, marketing department, finance department, and purchasing department. Among them, the sales department is the core, the network department is the vanguard, multi-department collaboration, overall management, there is a full-staff training every week, mainly to enhance the staff's service awareness, and each department has its own business seminar every week to improve employees Professional ability and solve practical problems at work.
What should I do if the cylinder head of the road sprinkler produced by CLW Group is twisted? The company engineer tells you to deal with it like this: use a feeler gauge and an accurate ruler to check the distortion of the sprinkler cylinder head, use a scraper to remove the oil, slack, gasket, sealant and carbon deposits on the surface of the cylinder head. The gasket debris enters the engine oil or engine coolant passages. At multiple locations on the bottom surface of the cylinder head, the distortion in six directions is measured. If the limit value is exceeded, the cylinder head is replaced.
- Chassis Brand:ISUZU
- Size:8165×2480×3500mm
- Price:Starting at$55000
- Chassis Brand:DONGFENG
- Size:8450×2500×3500mm
- Price:Starting at$70000
- Chassis Brand:DONGFENG
- Size:5990×2000×2380mm
- Price:Starting at$15000
- Chassis Brand:DONGFENG
- Size:6940×2130×2800mm
- Price:Starting at$25000