CLW GROUP undertakes foreign aid missions from national ministries and commissions every year, using strict military quality and international standards to produce various suitable and useful special vehicles. From the United Nations to the African continent, from Southeast Asia to the Middle East, from the "Belt and Road" to Europe and North America, Chengli special vehicles have left behind a variety of foreign-aided special vehicles, allowing the world to share the reputation of Chengli manufacturing and let the world listen with strength To the sound and charm made in China.
Today, the editor summarizes what are the common faults of the high-pressure cleaning trucks produced by CLW Group?
1. When the power switch of the high-pressure cleaner is turned on, although the machine has a high-voltage output, the cleaning effect is not very good. Causes: The temperature of the liquid in the cleaning tank is too high, the selection of the cleaning fluid is inappropriate, the high-pressure frequency coordination is not adjusted properly, and the level of the cleaning fluid in the cleaning tank is not appropriate.
2. The DC fuse of the high-pressure cleaner has a fusing failure. Cause: The rectifier bridge stack or the power tube is burnt out, or it is caused by the failure of the transducer.
3. When the power switch of the high pressure washer is turned on, the indicator light is on, but the high voltage is not output.
How much does a truck mounted crane weight,It is inevitable for a vehicle to break down during driving. If timely treatment can prevent further damage to the accessories and ensure driving safety, how to deal with these common failures? Today, the technical engineer of the after-sales department of CLW Group will show you some practical troubleshooting methods for flatbed trucks.
1. The fan belt of the flatbed transporter can be damaged by the "suturing method", that is, drill several small holes at the distance between the two ends at the distance of 1-2cm, and use the thin iron wire to stitch the belt together.
The staff of CLW GROUP welcomed Mr Wang from Chongqing who came to pick up the car Mr Wang ordered 5 sets of 124m miscellaneous dangerous goods semi-trailers from our company this time The vehicle is a dangerous goods transport vehicle with a closed top and cannot be opened; when the side door type and location are selected, the internal width of the vehicle body is 2360 (mm) This vehicle is specially used to transport containers with independent containers (bottles, bags, barrels) Copper waste, nickel-containing waste, lead-containing waste, chromium-containing waste, waste batteries, zinc-containing waste, waste mineral oil,how much does a truck mounted crane weight.
CLW group has sorted out the evaluation of Dongfeng Furica 8.6 square rescue refueling truck. The second part: The tank body of this refueling truck is designed for separate storage. The interior is equipped with anti-wave partitions, which can lighten the tank during driving. The internal oil product shakes to keep the driving stable. There are a lot of European standard configurations on this fueling truck. There are two sets of oil loading, pump inlet and outlet, and overflow prevention probe sockets, one set of emergency shut-off device and one set of oil and gas recovery device. Cooperate to ensure the normal operation of the fuel truck.
How much does a truck mounted crane weight,Compared with traditional watering truck spray guns, the intelligent rotating nozzles used on the watering truck produced by CLW Group have the following advantages:
1. The water cannon is made of stainless steel and imported motors;
2. It can be operated in the cab, up and down, and wireless in all directions. Remote control operation, the washing effect is remarkable (the remote control is 98-200 meters, can be rotated 360 degrees);
3. To adapt to the requirements of road cleaning, use the process of washing, washing, sweeping, and collecting to control the road to be clean and free of sand and soil residue;
4. Spraying process The water spray state can be flexibly adjusted in the middle, and the sprayed water column can be divided into straight-through and shower-like. In the straight-through state, the water pressure increases, and it can spray roads, wash road cliffs, and remove insects from green plants.
CLW Group regards talents as an important corporate resource. The company has four establishments for the talent strategy. One is to establish the concept of "talents are the first element in the development of productivity." Seeking, knowing, using and cultivating talents are the necessary qualities for successful managers. The second is to establish the concept of "talents are living resources".
Every link must be "people" as the center. The third is to establish the concept of "talent internationalization". Cultivate talents in accordance with the standards for participating in international competition. The fourth is to establish a "zero distance" concept of talent competition.
