EN CN
Home / Services / Vehicle Knowledge / FAQ / How truck mounted crane works

How truck mounted crane works

29 Sep 2020Email

CLW GROUP ushered in Mr. Liu, a watering truck ordering customer in Xi’an, Shaanxi. According to the contract, today is the delivery time of the watering truck. Two 12 cubic meters of high-end, atmospheric, and sophisticated Dongfeng special chassis watering trucks are presented to him. ,

 

This is the third time he has ordered the watering truck through the sales department of Chengli Special Vehicle Company, because the 8-cubic watering truck and 10-cubic watering truck that he bought before have high configuration, good quality, easy operation, high efficiency, and reasonable price. The high cost performance, coupled with the thoughtful and meticulous pre-sale service, made him choose Chengli Group.

 

How truck mounted crane works

 

CLW Group replaces the road sweeper sweeper hydraulic oil clutch if the new and old oil models are different, how to deal with it? When replacing the hydraulic oil, all the original hydraulic oil must be drained, and then the hydraulic transmission system must be cleaned with new oil. The specific methods are as follows:

1. Connect the air pipe of the pump to the air pipe joint on the top of the liquid tank, and tighten the storage tank. Liquid tank cover;

2. Remove the protective cover on the exhaust valve of the working cylinder, install the hose, and insert one end of the hose vertically into the collection container. At the same time, loosen the exhaust valve;

3. Use the pump to pump up the air continuously. The pressure of the compressed air forces the hydraulic oil to be discharged.

 

 

How to judge the quality of a refrigerated truck? The core component of a refrigerated truck is the insulation body. The most important thing to buy a refrigerated truck is to understand the thickness of the insulation body, which determines the cooling effect of the vehicle and the most important thing in the duration of insulation. The general insulation body thickness is 8CM, which is less than The insulation effect of this thickness will be poor, the refrigerator will continue to work, increase fuel consumption, and subsequent service costs will rise significantly. The refrigerated carriages produced by CLW Group are flat and generous, with beautiful lines, and full materials. All locks are made of stainless steel, which is worth your confidence to buy.

 

 

How truck mounted crane works,CLW GROUP delivered the 18-square water truck to Wuhan users after the National Day. The car adopts Dongfeng’s new National Fourth rear double-axle chassis. It is equipped with Suizhou Qixing luxury cab. Give the car a high evaluation. Dongfeng’s new national four rear double-axle 18-square sprinkler uses Hangzhou Weilong pumps, which have high working pressure and low fuel consumption. The tank body and metal accessories are shot blasted, the paint film is uniform, and the color is bright and lasting.

 

 

How truck mounted crane works,The vacuum truck uses airflow movement to collect and store dust and garbage, with a net absorption rate of 993%, without secondary dust It can effectively reduce dust pollution and improve air quality The following CLW group will take you to learn about this Dongfeng Dolica D7 National VI vacuum cleaner, which is known as a cleaning expert The first article: When viewed from the side of the car, the upper body of the car adopts a split design, with a stainless steel water tank in the front, a middle connecting machine compartment cover, and a large-capacity trash can in the rear The box body is made of stainless steel, and the inside of the box body is treated with simple anti-corrosion treatment.

 

The car adopts a brushless design, a central ultra-wide suction cup, the width of the main suction cup reaches 28m, the width of the left and right auxiliary suction cups is 500mm, the maximum total working width is 24m, and the maximum cleaning particle width is 98mm,how truck mounted crane works.

 

 

What are the new products of CLW Group and what are the advantages of hoisting compact garbage trucks?

1. The structure of the barrel is a fully enclosed design. The lid of the barrel is automatically closed, so birds, mice or other animals will not throw garbage in the surrounding areas to affect the environment and spread diseases. It is especially important in rural areas such as towns and villages. The advantages of Jiefang Hoisting Compression Garbage Truck are low investment cost and convenient management.

2. It can meet the requirements of manual/trolley unloading in various ways. A compressed garbage truck can connect the deep-buried bucket and the terminal garbage treatment plant.

 

 

CLW Group has obtained a number of domestic and foreign system certifications, and has successively passed: ISO9001-2008 quality management, ISO 14001 environmental management, OHSAS18001 occupational health and safety management and other system certifications, GJB9001B-2009 national military standard certification and confidentiality certification (national level three) , Automobile energy saving and environmental protection certification, automobile exemption certification, American mechanical engineer ASME (ASME) certification, EU agreement ADR certification, etc.

Related Truck Knowledge
More Truck Knowledge
19 May 2021
Special truck weight ● Special truck weightThe weight of a special truck refers to the quality of a fully equipped truck, including the quality of al...
Read more
19 May 2021
Truck Dimensions ● DimensionsTruck Dimensions refer to the body length, body width and height of a truck. ● Truck body lengthThe length of the truck...
Read more
14 May 2021
The action of the hydraulic cylinder of the roll-off garbage truck is controlled by a manual hydraulic multi-way valve, and the hydraulic mu...
Read more
12 May 2021
Everyone knows that: garbage trucks with detachable compartments can also be called hook-arm garbage trucks and pull-arm garbage trucks. The truck is ...
Read more
Related Products
More
Fire Engine - ISUZU - 6CBM
Fire Engine - ISUZU - 6CBM
  • Chassis Brand:ISUZU
  • Size:8165×2480×3500mm
  • Price:Starting at$55000
Fire Engine - DF - 8CBM
Fire Engine - DF - 8CBM
  • Chassis Brand:DONGFENG
  • Size:8450×2500×3500mm
  • Price:Starting at$70000
Watering Truck - DF - 5000L
Watering Truck - DF - 5000L
  • Chassis Brand:DONGFENG
  • Size:5990×2000×2380mm
  • Price:Starting at$15000
Watering Truck - DF - 8000L
Watering Truck - DF - 8000L
  • Chassis Brand:DONGFENG
  • Size:6940×2130×2800mm
  • Price:Starting at$25000
Request A Quote
Contact us for more details of the special trucks.
Contact CLW
Tel
+86-13997899091
Leave a message
Contact Person*
Mobile Number
E-mail*
Company's Name
Products
Garbage Truck
Purchase
Pre-sales service
After-sales service
On-site training
Maintenance
Chassis
Spare Parts
Other
Provide your comments and questions.