The 4.5-ton electric watering truck truck produced by CLW GROUP's production plant has been highly praised by Guangdong customers. The announced volume of the truck is 4.04 square meters, with a rated load of 3850kg; a full-load climbing degree of 25%, a charging time of 1.5h, and a working voltage of 512V. Driving range: 320 (km) (full load constant velocity method) Battery capacity: 158.7 (kwh), battery cell type: lithium iron phosphate. watering truck width: ≥16 (m), water cannon range: ≥37 (m), pump head: 50 (m) pump flow: 40 (m³/h).
Dongfeng T5-15 square sprinkler has an effective volume of 15 cubic meters, Q235 steel plate is automatically welded, and equipped with a high-power sprinkler pump. It can self-prime water + fire hydrant + water tank top. The tank is equipped with anti-wave partitions to prevent water hammer impact. The pipeline adopts Large-caliber seamless steel pipes and ball valves, 2 front hedges, 2 rear sprinklers for dust suppression, 2 side spray irrigation, green water cannons at the tail, can be rotated in all directions, support continuous adjustment into straight, heavy rain, light rain, drizzle , Foggy.
The sales department of CLW Group will introduce you to the maintenance of the flatbed transporter:
1. The connection between the flatbed transporter's turbocharger and the intake and exhaust pipes must be tight and not leaky. If there is a leak between the exhaust pipe and the exhaust turbine, The efficiency of the supercharger will be greatly reduced, and the exhaust temperature of the diesel engine will rise sharply and damage the valve and the supercharger.
2. Before starting the new engine, the turbocharger and turbocharger oil filter must be filled with clean oil to ensure that the diesel engine works together and the turbocharger bearings can be lubricated. After the car has traveled 8000～9800km, the supercharger oil filter element must be replaced.
Hu Linfeng is the marketing director of CLW Group Under the leadership of Mr Hu Linfeng, the company’s sales team has continuously carried out training and learning to ensure that they can advance bravely in the increasingly competitive market and take root in the industry Under the supervisor, conduct business training three times a week, collect related problems, organize problems and solutions to the system, continuously improve the professional knowledge and service skills of sales staff, actively cultivate service awareness, and strengthen the team’s collaboration and coordination,isuzu truck mounted crane.
Isuzu truck mounted crane,What should I do if the cylinder head of the road sprinkler produced by CLW Group is twisted? The company engineer tells you to deal with it like this: use a feeler gauge and an accurate ruler to check the distortion of the sprinkler cylinder head, use a scraper to remove the oil, slack, gasket, sealant and carbon deposits on the surface of the cylinder head. The gasket debris enters the engine oil or engine coolant passages. At multiple locations on the bottom surface of the cylinder head, the distortion in six directions is measured. If the limit value is exceeded, the cylinder head is replaced.
