CLW GROUP received an order for 6 Orient Dolica D7 National VI cleaning sewage suction trucks ordered by a customer in Jilin. The customer stated that the car was used to improve the sanitary environment of the local poor counties and ensure the sanitary conditions of the local people’s lives. The company learned about the situation , Immediately, an urgent order was placed on the production workshop. With the support of the perfect technological process and quality inspection system, Cheng Liren took only 3 days to complete the production and commissioning of 6 brand-new sewage suction trucks.
What site lists dispatched ambulance runs,Dongfeng Asphalt Distributor can adopt manual/automatic control of spraying volume and working width, and each nozzle can be controlled separately, so as to realize arbitrary adjustment of spraying and spreading width. The asphalt tank is equipped with a sedimentation drain, and is equipped with a liquid level indicator, an alarm and a safety device. All heat pipes are equipped with a thermal insulation layer to reduce heat dissipation and avoid scalding the operator. The asphalt spraying rod adopts a three-section folding type Structure, double or multiple spraying can be realized by moving the spreading rod up and down.
Some parts of the watering truck chassis are more likely to be damaged than the engine, but when it comes to maintenance, everyone often pays attention to the engine and ignores these parts. Let's take a look at the editor of CLW Group. 1. Shock absorber: Oil leakage is a precursor to damage to the shock absorber. When we sprinkle water on the road with bad road conditions, increased turbulence or longer braking distance is a precursor to damage to the shock absorber. 2. Steering tie rod: The slack of the steering tie rod seriously affects driving safety. Therefore, when we are doing maintenance, we must check the parts. 3. Exhaust pipe: The exhaust pipe is one of the most easily damaged parts at the bottom of the vehicle. Don't forget to check it during maintenance.
In the philosophy of Zhu Wu, the director of CLW Group’s hazardous chemical workshop, there are no outstanding individuals, only outstanding teams. Therefore, he always grasps the progress and does not affect the work progress of the entire team because of the individual. He takes his own responsibility and always insists. He personally went to the scene to investigate; he could talk and do more about the problems that occurred at work, and take practical actions to help and infect colleagues who just joined the work. Diligent, good at thinking, put forward a lot of suggestions for improving work efficiency, and do my best to contribute to the company.
The car lights are the eyes of the "CLW" sprinkler, especially at night, if your reversing lights have problems, they are likely to be bumped due to vision problems The following editor will take you to understand the cause of the reversing light failure and the correct steps for troubleshooting: 1 If the reversing lights on both sides are not on, you should first check whether the fuse is open If it is normal, proceed to the next inspection 2 Put the gear of Hubei Chengli sprinkler into reverse gear, and check whether the voltage on the lamp holder and the black wire is normal 3 If there is still no problem, check whether the reversing bulb is damaged and whether the grounding wire is in good contact If the voltage is zero, check whether the voltage of the black wire at the reverse light switch is normal,what site lists dispatched ambulance runs.
