CLW GROUP bid for the procurement project of forest fire fighting water tanker for the equipment modernization construction project in key forest areas of Qinghai Province. Our company won the bid with a strong advantage and delivered it for acceptance within 30 days. The car adopts Dongfeng 145 chassis, Cummins 170 horsepower engine, and strong power. It is suitable for working in mountainous forests. In addition to the standard water pump, it is equipped with a fire pump. In addition to normal sprinkling, it can also be used for forest fire protection. The fire pump can be used for remote fire fighting at 45 meters. The vehicle is dazzling red. Recognized.
CLW Group wreckers are equipped with lifting, towing, and hoisting devices on the basis of a special chassis to perform tasks such as wrecking, lifting, and back-loading of vehicles. All steel components are treated with pickling, phosphating and cathodic electrophoretic paint, so that the components will not rust for a long time, which greatly increases the service life of the mechanism. Before the upper assembly enters the final assembly, it undergoes a bench test. After the test is qualified, it is put into the partial assembly, which effectively guarantees the reliability of the entire hydraulic system.
Why ambulance is so expensive,Recently, many new customers who purchased truck-mounted cranes asked about the daily use precautions. Today, the editor of CLW Group sorted out some common related knowledge and shared with you. 1. Keep the crane clean for a long time, adjust and tighten loose parts in time to prevent the loose parts from aggravating the wear of the parts or causing the parts to be lost. 2. Pay attention that the working load during the running-in period of the truck mounted crane should not exceed 80% of the rated working load, and the truck mounted crane should be arranged with a suitable workload to prevent the machine from overheating during long-term continuous operation.
The ability and potential of a team are mainly determined by the members. The quality and abilities of the members basically determine the development prospects of the company. Although professional skills can be improved through training and collaboration, short-term training cannot be fundamental Therefore, when recruiting employees, CLW Group should not only examine the professional skills of the interviewer, but also focus on the overall quality of the other party, and try to have highly responsible compound talents.
Why ambulance is so expensive,The above is about the part of the daily maintenance and maintenance of the compression garbage truck shared by CLW Group: 1. The oil seal on the drive shaft is damaged. Replace the oil seal. The fault is mostly caused by dirty oil. 2. The control lever of the compression garbage truck is connected incorrectly or stuck. re-install. 3. The valve body connecting bolts are too loose. Tighten the bolts to achieve the torque required by the manufacturer. Replace the O-ring seal between the valve bodies. If the O-ring seal is damaged by dirt, clean the hydraulic system and find out the cause of the contamination. The cylinder barrel is damaged. Replace the cylinder and find out the cause of damage. 4. The piston rod seal is leaking oil. Replace the seal to find out the cause of wear. Both internal and external dirt may cause damage to the seal, which should be repaired in time.
