What was the ambulance transformer,The watering trucks produced by CLW GROUP also ushered in the peak sales season in the hot summer. Our watering trucks are used for road cooling, construction site dust reduction, and landscaping. On July 10, 2017, the head of China Railway 13th Bureau contacted me The sales manager of the company consulted our watering trucks, and after telephone communication, we finally determined that our Dongfeng Dolika watering trucks, with a tank volume of 8.5 cubic meters, ordered 18 units at a time. Yesterday the vehicles were delivered to the user’s location, successfully registered and delivered. The user is very satisfied.
One of CLW Group's emergency measures for sewage suction truck failure: 1. The tubing is broken. In this case, you can find a rubber or plastic tube with the same diameter as the tubing. If the tubing is not tight enough, the two ends can be tied tightly with iron wires. , To prevent oil leakage. 2. The water inlet and outlet hoses of the sewage suction truck are broken. If the crack is not large, you can use a cloth strip to simply wrap the leaking area. If the crack is large, it is best to put a bamboo or iron pipe on the cracked area and use a wire tie tight. 3. Screw hole sliding wire, screw hole sliding wire will cause oil leakage or loosening of the connecting rod, making it unable to work. At this time, the original screw can be flattened with a hammer to expand both sides, and then tighten it. The method can not be used multiple times, and go to the repair station to repair in time after emergency.
What was the ambulance transformer,Many friends know that there is a certain danger in transporting dangerous goods, and would like to know how to improve safety? Here CLW Group, as a professional manufacturer of dangerous goods transport vehicles, reminds users: 1. The cargo box of van-type dangerous goods transport vehicles should be made of wooden floor, so as to avoid sparks; if iron floor is used, the corresponding lining should be used. Pad protection; 2. The material of the tank (tank) body of the tank (tank) truck must be compatible with the nature of the cargo. 3. Take corresponding measures to restrict the risk factors of various dangerous goods.
What was the ambulance transformer,CLW GROUP can be converted into special vehicles with various functions and configurations according to customer requirements. The customers in Huainan, Anhui Province have searched in many ways and learned about Chengli Group. After various consultations and comparisons, they are I am satisfied with the production capacity and product quality. After communicating with the sales department, I decided to purchase 5 Dongfeng Dolica one-to-one wrecker trucks. This model adopts double-sided linkage operation, which is convenient, fast, time-saving and labor-saving, and has been widely used by domestic and foreign customers.
CLW group introduces the special configuration of the concave plate type front four rear eight flatbed transporter: the vehicle has rear outriggers under the flat slope, when it is loaded, the outriggers can be lowered to disperse the gravity of the vehicle and increase the load capacity of the vehicle. It is generally used on uneven or soft ground to prevent head lifting. A spring locking hook is also installed between the flat slope and the spring ladder. The locking hook is a hand-turned lock. When the ladder needs to be used, it is manually unlocked and the ladder can be lowered.
The "CLW" refrigerated truck manufactured with new technology and new technology has the characteristics of good thermal insulation performance, beautiful appearance, light overall weight, high strength, and no leakage. The compartment board has strong impact resistance, and has good corrosion resistance and anti-aging resistance to the atmosphere, water, acid, alkali, salt and other media. Through optimized design, the center of mass of the vehicle is reduced, the effective volume of the carriage is increased, and the safety of the vehicle is higher. The car body structure adopts polyester wet panel making process and glass fiber reinforced whole wooden car body frame and embedded steel plate structure, using the most advanced fifth-generation fully enclosed polyurethane panel bonding method in the world.
At present, CLW Group has the qualifications for vehicle (including chassis) manufacturing, passenger car manufacturing, new energy vehicle qualifications, special vehicle manufacturing qualifications, fire truck manufacturing qualifications, crane manufacturing qualifications, and pressure vessel manufacturing qualifications. It is the current automobile manufacturing enterprise qualification The most complete company, Chengli Specialty Automobile, a subsidiary of Chengli Group, has developed into the largest industry leading enterprise in China. It is worthy of being the leader of today's special-purpose vehicle manufacturers.
