Why is the ambulance sign printed in reverse,CLW GROUP is the largest manufacturer of special vehicles in China, and we are also the "specialized car people" who guard the beautiful homeland. In the face of the epidemic, the UAE decisively purchased a batch of dust suppression vehicles from China Chengli Group for epidemic prevention and disinfection. After receiving the order, the Chengli dust suppression vehicle professional factory worked day and night to complete the UAE 45 Dongfeng Tianjin in eight days. The 98-meter dust suppression truck was delivered for export. Hubei Suizhou Chengli Group used actions to push the capabilities of its special vehicles to the world.
The sweeping system of our company's road sweeper is powered by the auxiliary engine and does not interfere with the power of the whole vehicle. The control box is in the cab, and each system is electrically controlled centrally for easy operation. The appearance is computerized design, high side skirts, curved surface transitions, and the whole is coordinated and symmetrical. Sweepers are classified by operation mode: hand-push sweeper, electric sweeper, automatic sweeper, pure sweeper, suction sweeper, pure suction sweeper, full suction sweeper, dry sweeper, wet sweeper.
Drivers and friends should regularly maintain the auxiliary engine of the road sweeper. How to maintain it correctly? Please work with the editor of CLW Group to understand: 1. The road sweeper cleans more dust on the road for a long time, and the air intake pipe is easily blocked. The air intake filter should be cleaned regularly. Generally, the air intake filter should be replaced after 5 times of cleaning. , The cleaning cycle can be determined by the air quality in the daily driving area. 2. The replacement of the coolant for the auxiliary engine of the road sweeper. If the engine temperature is too high for a long time, it will produce rust and corrosion. The coolant should be replaced in time to avoid damage to the engine if it is not replaced for a long time. Clean the auxiliary engine radiator regularly to avoid high temperature.
In order to open up the international market, Chairman Cheng Aluo set up trade departments in Beijing, Guangzhou, Wuhan and other places, and set up a special international affairs department, forming a sales network covering domestic and foreign markets In order to improve the quality of sales staff, he personally conducted special training for sales staff, and adjusted the performance reward method for sales staff, which increased the enthusiasm of sales staff Not only that, Cheng Aluo also made full use of platforms such as the Canton Fair and Auto Show to vigorously promote Chengli's products, which played an important role in the increase of CLW Group's overall turnover,why is the ambulance sign printed in reverse.
How to solve the common problem of non-absorption of sprinkler pumps? CLW Group will answer for you. The first step is to check whether the switch is turned on. The second step is to check the filter. When the sprinkler pump is not working well, check whether there is debris blocking the water inlet on the front filter of the suction pipe, and then check whether the water inlet pipe is sealed step by step, and check whether there is an air leakage failure. The third step is to check the vacuum. The water diversion height of the water pump used by ordinary sprinklers should be less than 5 meters, and then check whether the oil seal of the water pump of the sprinkler is damaged. Leakage of the pump shaft affects its vacuum, and the seal should be replaced. The fourth step is to check the power take-off. Check whether the power take-off of the sprinkler is working. The separation of the power take-off from the drive shaft will cause the water pump to fail to work.
